On 02/11/2016 06:52 AM, Heiko Schocher wrote: > Hello Marek, Hi!
> added Andreas to cc as he is the at91 custodian. > > Am 10.02.2016 um 22:41 schrieb Marek Vasut: >> Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the >> Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI >> CAN controllers and DRAM, the baseboard contains UART connectors, >> ethernet port, microSD slot, LCD header, 2x CAN connector and a >> lot of expansion headers. >> >> Signed-off-by: Marek Vasut <ma...@denx.de> >> Cc: Andreas Bießmann <andreas.de...@googlemail.com> Andreas should be in Cc , see ^ , could it be that the ML is doing something funny again ? >> --- >> arch/arm/mach-at91/Kconfig | 6 + >> board/denx/ma5d4evk/Kconfig | 12 ++ >> board/denx/ma5d4evk/MAINTAINERS | 6 + >> board/denx/ma5d4evk/Makefile | 7 + >> board/denx/ma5d4evk/ma5d4evk.c | 417 >> ++++++++++++++++++++++++++++++++++++++++ >> configs/ma5d4evk_defconfig | 11 ++ >> include/configs/ma5d4evk.h | 255 ++++++++++++++++++++++++ >> 7 files changed, 714 insertions(+) >> create mode 100644 board/denx/ma5d4evk/Kconfig >> create mode 100644 board/denx/ma5d4evk/MAINTAINERS >> create mode 100644 board/denx/ma5d4evk/Makefile >> create mode 100644 board/denx/ma5d4evk/ma5d4evk.c >> create mode 100644 configs/ma5d4evk_defconfig >> create mode 100644 include/configs/ma5d4evk.h > > just some nitpick ;-) > > [...] >> diff --git a/board/denx/ma5d4evk/ma5d4evk.c >> b/board/denx/ma5d4evk/ma5d4evk.c >> new file mode 100644 >> index 0000000..d1a550e >> --- /dev/null >> +++ b/board/denx/ma5d4evk/ma5d4evk.c >> @@ -0,0 +1,417 @@ >> +/* >> + * Copyright (C) 2015 Marek Vasut <ma...@denx.de> >> + * >> + * SPDX-License-Identifier: GPL-2.0+ >> + */ >> + >> +#include <common.h> >> +#include <asm/io.h> >> +#include <asm/arch/at91_common.h> >> +#include <asm/arch/at91_pmc.h> >> +#include <asm/arch/at91_rstc.h> >> +#include <asm/arch/atmel_mpddrc.h> >> +#include <asm/arch/atmel_usba_udc.h> >> +#include <asm/arch/gpio.h> >> +#include <asm/arch/clk.h> >> +#include <asm/arch/sama5d3_smc.h> >> +#include <asm/arch/sama5d4.h> >> +#include <atmel_hlcdc.h> >> +#include <atmel_mci.h> >> +#include <lcd.h> >> +#include <mmc.h> >> +#include <net.h> >> +#include <netdev.h> >> +#include <spi.h> >> +#include <version.h> >> + >> +DECLARE_GLOBAL_DATA_PTR; >> + >> +/* >> + * re h ; load 0x200000 ma5d4evk/u-boot-spl.bin BIN ; go 0x200000 >> + * h ; load 0x26f00000 ma5d4evk/u-boot.bin BIN ; go 0x26f00000 >> + */ > > ;-) Maybe a comment that this are the magic commands in the BDI > for starting the generated images would be helpful. Guh, nice catch, removed. > And plan is to switch to CONFIG_DM for all boards (I know, I did not > started with this job for "my" boards ...)... do you have plans/time > for switching (or may you use it already and i just overseen it)? I'd like to start with MX6 when I have time, but that's not gonna happen soon I'm afraid. I'm hoping someone from Atmel will take up the job for Atmel-based boards ;-) > Beside of this: > Reviewed-by: Heiko Schocher <h...@denx.de> > > bye, > Heiko _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
