Hello Marek, added Andreas to cc as he is the at91 custodian.
Am 10.02.2016 um 22:41 schrieb Marek Vasut:
Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI CAN controllers and DRAM, the baseboard contains UART connectors, ethernet port, microSD slot, LCD header, 2x CAN connector and a lot of expansion headers. Signed-off-by: Marek Vasut <ma...@denx.de> Cc: Andreas Bießmann <andreas.de...@googlemail.com> --- arch/arm/mach-at91/Kconfig | 6 + board/denx/ma5d4evk/Kconfig | 12 ++ board/denx/ma5d4evk/MAINTAINERS | 6 + board/denx/ma5d4evk/Makefile | 7 + board/denx/ma5d4evk/ma5d4evk.c | 417 ++++++++++++++++++++++++++++++++++++++++ configs/ma5d4evk_defconfig | 11 ++ include/configs/ma5d4evk.h | 255 ++++++++++++++++++++++++ 7 files changed, 714 insertions(+) create mode 100644 board/denx/ma5d4evk/Kconfig create mode 100644 board/denx/ma5d4evk/MAINTAINERS create mode 100644 board/denx/ma5d4evk/Makefile create mode 100644 board/denx/ma5d4evk/ma5d4evk.c create mode 100644 configs/ma5d4evk_defconfig create mode 100644 include/configs/ma5d4evk.h
just some nitpick ;-) [...]
diff --git a/board/denx/ma5d4evk/ma5d4evk.c b/board/denx/ma5d4evk/ma5d4evk.c new file mode 100644 index 0000000..d1a550e --- /dev/null +++ b/board/denx/ma5d4evk/ma5d4evk.c @@ -0,0 +1,417 @@ +/* + * Copyright (C) 2015 Marek Vasut <ma...@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/atmel_mpddrc.h> +#include <asm/arch/atmel_usba_udc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <asm/arch/sama5d3_smc.h> +#include <asm/arch/sama5d4.h> +#include <atmel_hlcdc.h> +#include <atmel_mci.h> +#include <lcd.h> +#include <mmc.h> +#include <net.h> +#include <netdev.h> +#include <spi.h> +#include <version.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * re h ; load 0x200000 ma5d4evk/u-boot-spl.bin BIN ; go 0x200000 + * h ; load 0x26f00000 ma5d4evk/u-boot.bin BIN ; go 0x26f00000 + */
;-) Maybe a comment that this are the magic commands in the BDI for starting the generated images would be helpful. And plan is to switch to CONFIG_DM for all boards (I know, I did not started with this job for "my" boards ...)... do you have plans/time for switching (or may you use it already and i just overseen it)? Beside of this: Reviewed-by: Heiko Schocher <h...@denx.de> bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
