Michal Simek wrote: > Hi, > > > > FIT support is not in mainline u-boot. Only in my testing repository. > >> If I fix that and try to load a FIT image with a kernel and device-tree, >> the bootm command completely ignores the device tree; unfortunately, > > Yes the same thing as with FIT. Not in mainline yet. Simple no time. But > I have patches in my tree and I want to send them to next merge open window. > > > >> I >> don't have a log of this on hand, because now even image loading has >> broken somehow. For example, fatls ace 0 gives " 131074 . ", and >> attempting DHCP boot results in a spew of "ARP Retry count exceeded; >> starting again" -- retry count exceeded, despite it never having tried >> even once? > > I'll test it. > > >> I've attached a log of the console output under both conditions, as well >> as the config.mk and xparameters.h under microblaze_generic; for some >> reason, the given U-Boot BSP assumes 100MHz, despite the board using >> 125MHz. Does anyone have advice for getting u-boot to work on this board? >> > > I have fix for u-boot bsp which fix it. The same issue is for uart16550. > > I am going to update my git repo at http://git.monstr.eu/git/gitweb.cgi > There will be updated u-boot bsp too. > > Thanks, > Michal > > >> Thanks in advance for any help. >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot > >
Thanks for the help! I cloned your u-boot-microblaze repository, and the same fit_hdr_t issues applied; now I'm also working out other various issues. If it would help, I can attach (or send) my project file or files, and even an image of the CompactFlash card I am using -- it's a 1GB card, with a 100MB fat16 and the rest in ext2. Oddly enough, ext2ls just plain returns silently. u-boot-microblaze/drivers/mtd/cfi_flash.c:2088: undefined reference to `monitor_flash_len' I've also noticed that the "top" BSP looks in the Xilinx install path and the project path, but not the EDK user repository. Thanks again for the help. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
