On 02/05/2016 02:43 PM, Eric Anholt wrote: > For Raspberry Pi, we had the input clock rate to the pl011 fixed in > the rpi.c file, but it may be changed by firmware due to user changes > to config.txt. Since the firmware always sets up the uart (default > 115200 output unless the user changes it), we can just skip our own > uart init to simplify the boot process and more reliably get serial > output.
Tested-by: Stephen Warren <swar...@wwwdotorg.org> (With a 6MHz init_uart_clock and with/without init_uart_baud=9600) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
