Hi Alison, On Wed, Jan 6, 2016 at 1:31 PM, Huan Wang <alison.w...@nxp.com> wrote: > Hi, > > I tested this set on my LS1021ATWR board. NOR boot using DUART as > serial output is ok. But NOR boot using LPUART as serial output failed. How > about your test result? >
Yes, I tested NOR boot using DUART or LPUART. Both boot. I suspect you forgot to update the RCW for LPUART, or change the jumper setting (J19, J20) to route the LPUART signal. [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
