> -----Original Message-----
> From: Marek Vasut [mailto:ma...@denx.de] 
> Sent: Wednesday, December 23, 2015 9:25 AM
> To: 圣江 吴
> Cc: u-boot@lists.denx.de; cl...@altera.com; dingu...@opensource.altera.com; 
> dinh.li...@gmail.com; pa...@denx.de; s...@denx.de
> Subject: Re: [PATCH] arm: socfpga: Fix QSPI doesn't work on socdk board
> 
> On Wednesday, December 23, 2015 at 02:22:49 AM, 圣江 吴 wrote:
> > On Dec 22, 2015, at 12:33 PM, Marek Vasut <ma...@denx.de> wrote:
> > 
> > On Tuesday, December 22, 2015 at 09:19:16 PM, Marek Vasut wrote:
> > 
> > On Tuesday, December 22, 2015 at 10:18:09 AM, shengjiangwu wrote:
> > > Updated pinmux group MIXED1IO[15-20] for QSPI.
> > > Updated QSPI clock.
> > > 
> > > Signed-off-by: shengjiangwu <shengjian...@icloud.com>
> > > Cc: Chin Liang See <cl...@altera.com>
> > > Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> > > Cc: Dinh Nguyen <dinh.li...@gmail.com>
> > > Cc: Pavel Machek <pa...@denx.de>
> > > Cc: Marek Vasut <ma...@denx.de>
> > > Cc: Stefan Roese <s...@denx.de>
> > 
> > Applied, thanks.
> > 
> > I will push your patches to [1] in a few hours, can you try and see if 
> > the CV SOCDK works fine for you? Thanks
> > 
> > [1] http://git.denx.de/?p=u-boot/u-boot-
> > socfpga.git;a=shortlog;h=refs/heads/master
> > 
> > Pushed. Please let me know how SoCDK works for you now and if there 
> > are still some problems.
> > 
> > 
> > Best regards,
> > Marek Vasut
> > 
> > 
> > Hi Marek,
> > 
> > Thank you for your help, I tested the master branch, emac1 and QSPI 
> > works. Below is log.
> 
> Good! so we're happy ? Can you give USB a spin too? I think it might have 
> some issues and I don't have the necessary cable here.
> 
> [...]
> 
> Best regards,
> Marek Vasut

Hi Marek,

Yes, emac1 and qspi are working now. I'm afraid USB is not working,

=> usb reset
resetting USB...
USB0:   Core Release: 2.93a
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
dwc_otg_core_host_init: Timeout!
scanning bus 0 for devices... 1 USB Device(s) found
=> usb tree
USB device tree:
  1  Hub (480 Mb/s, 0mA)
      U-Boot Root Hub

=>

Best Regards,
ShengjiangWu

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to