On Wednesday, December 23, 2015 at 03:26:07 AM, 圣江 吴 wrote: > > From: Marek Vasut > > Date: 2015-12-23 10:07 > > To: ShengjiangWu > > CC: u-boot; clsee; dinguyen; dinh.linux; pavel; sr > > Subject: Re: [PATCH] arm: socfpga: Fix QSPI doesn't work on socdk board > > > > On Wednesday, December 23, 2015 at 03:02:10 AM, ShengjiangWu wrote: > > > > -----Original Message----- > > > > From: Marek Vasut [mailto:ma...@denx.de] > > > > Sent: Wednesday, December 23, 2015 9:25 AM > > > > To: 圣江 吴 > > > > Cc: u-boot@lists.denx.de; cl...@altera.com; > > > > dingu...@opensource.altera.com; dinh.li...@gmail.com; pa...@denx.de; > > > > s...@denx.de Subject: Re: [PATCH] arm: socfpga: Fix QSPI doesn't work > > > > on socdk board > > > > > > > > On Wednesday, December 23, 2015 at 02:22:49 AM, 圣江 吴 wrote: > > > > > On Dec 22, 2015, at 12:33 PM, Marek Vasut <ma...@denx.de> wrote: > > > > > > > > > > On Tuesday, December 22, 2015 at 09:19:16 PM, Marek Vasut wrote: > > > > > > > > > > On Tuesday, December 22, 2015 at 10:18:09 AM, shengjiangwu wrote: > > > > > > Updated pinmux group MIXED1IO[15-20] for QSPI. > > > > > > Updated QSPI clock. > > > > > > > > > > > > Signed-off-by: shengjiangwu <shengjian...@icloud.com> > > > > > > Cc: Chin Liang See <cl...@altera.com> > > > > > > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > > > > > > Cc: Dinh Nguyen <dinh.li...@gmail.com> > > > > > > Cc: Pavel Machek <pa...@denx.de> > > > > > > Cc: Marek Vasut <ma...@denx.de> > > > > > > Cc: Stefan Roese <s...@denx.de> > > > > > > > > > > Applied, thanks. > > > > > > > > > > I will push your patches to [1] in a few hours, can you try and see > > > > > if the CV SOCDK works fine for you? Thanks > > > > > > > > > > [1] http://git.denx.de/?p=u-boot/u-boot- > > > > > socfpga.git;a=shortlog;h=refs/heads/master > > > > > > > > > > Pushed. Please let me know how SoCDK works for you now and if there > > > > > are still some problems. > > > > > > > > > > > > > > > Best regards, > > > > > Marek Vasut > > > > > > > > > > > > > > > Hi Marek, > > > > > > > > > > Thank you for your help, I tested the master branch, emac1 and QSPI > > > > > works. Below is log. > > > > > > > > Good! so we're happy ? Can you give USB a spin too? I think it might > > > > have some issues and I don't have the necessary cable here. > > > > > > > > [...] > > > > > > > > Best regards, > > > > Marek Vasut > > > > > > Hi Marek, > > > > > > Yes, emac1 and qspi are working now. I'm afraid USB is not working, > > > > > > => usb reset > > > resetting USB... > > > USB0: Core Release: 2.93a > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > dwc_otg_core_host_init: Timeout! > > > scanning bus 0 for devices... 1 USB Device(s) found > > > => usb tree > > > USB device tree: > > > 1 Hub (480 Mb/s, 0mA) > > > U-Boot Root Hub > > > > Hm, darn. Can you or Chin check it ? It's either pinmux or wrong USB node > > in DT in arch/arm/dts/socfpga_cyclone5_socdk.dts . > > Hi Marek, > > Pin mux settings has error, set EMACIO[1-8] [10-13] from 3 to 2, then usb > works, > > => usb start > starting USB... > USB0: Core Release: 2.93a > scanning bus 0 for devices... 2 USB Device(s) found > => usb tree > USB device tree: > 1 Hub (480 Mb/s, 0mA) > > | U-Boot Root Hub > > +-2 Mass Storage (480 Mb/s, 98mA) > Generic USB Storage 000000000272
Cool, thanks! Patch please ;-) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
