On Tue, 2015-12-22 at 00:12 +0100, Marek Vasut wrote:
> On Monday, December 21, 2015 at 04:22:07 PM, Chin Liang See wrote:
> > When QSPI and NAND is enabled, the ubi and ubifs support
> > will be enabled too.
> > 
> > Signed-off-by: Chin Liang See <cl...@altera.com>
> > Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> > Cc: Dinh Nguyen <dinh.li...@gmail.com>
> > Cc: Pavel Machek <pa...@denx.de>
> > Cc: Marek Vasut <ma...@denx.de>
> > Cc: Stefan Roese <s...@denx.de>
> > ---
> >  include/configs/socfpga_common.h | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h index f7c0eb5..7c50100 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -300,6 +300,15 @@ unsigned int
> > cm_get_qspi_controller_clk_hz(void);
> >                             "-@1536k(UBI)\0"
> >  #endif
> > 
> > +/* UBI and UBIFS support */
> > +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
> > +#define CONFIG_CMD_UBI
> > +#define CONFIG_CMD_UBIFS
> > +#define CONFIG_RBTREE
> > +#define CONFIG_LZO
> > +#undef CONFIG_SPI_FLASH_USE_4K_SECTORS
> 
> This CONFIG_SPI_FLASH_USE_4K_SECTORS is Kconfig stuff, so it should
> go into 
> configs/socfpga_* , otherwise this is fine.
> 

oh, not aware of that. Ok let me update this.

Thanks
Chin Liang

> > +#endif
> > +
> >  /*
> >   * SPL
> >   *
> 
> Best regards,
> Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to