On Friday, December 11, 2015 at 10:25:59 AM, Chin Liang See wrote: > Hi Marek, > > On Fri, 2015-12-11 at 17:19 +0800, Chin Liang See wrote: > > When QSPI and NAND is enabled, the ubi and ubifs support > > will be enabled too. > > > > Signed-off-by: Chin Liang See <cl...@altera.com> > > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > > Cc: Dinh Nguyen <dinh.li...@gmail.com> > > Cc: Pavel Machek <pa...@denx.de> > > Cc: Marek Vasut <ma...@denx.de> > > Cc: Stefan Roese <s...@denx.de> > > --- > > > > include/configs/socfpga_common.h | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/include/configs/socfpga_common.h > > b/include/configs/socfpga_common.h > > index b3f65b6..a07017b 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -274,6 +274,14 @@ unsigned int > > cm_get_qspi_controller_clk_hz(void); > > > > #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE > > #define CONFIG_ENV_SIZE 4096 > > > > +/* UBIFS support */ > > +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND) > > +#define CONFIG_CMD_UBI > > +#define CONFIG_CMD_UBIFS > > +#define CONFIG_RBTREE > > +#define CONFIG_LZO > > +#endif > > + > > I have issue on ubifsmount my ubinized image. I suspect it might > created wrongly. The code is ok based on previous patches and the one > you sent to me. Wonder you might able to validate with your working > ubinized image?
Try applying this patch: [PATCH] arm: Replace test for CONFIG_ARMV7 with CONFIG_CPU_V7 And then erase the SPI flash, reinstall the ubi image and try again. Does it help ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
