On Monday, December 21, 2015 at 04:22:07 PM, Chin Liang See wrote: > When QSPI and NAND is enabled, the ubi and ubifs support > will be enabled too. > > Signed-off-by: Chin Liang See <cl...@altera.com> > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > Cc: Dinh Nguyen <dinh.li...@gmail.com> > Cc: Pavel Machek <pa...@denx.de> > Cc: Marek Vasut <ma...@denx.de> > Cc: Stefan Roese <s...@denx.de> > --- > include/configs/socfpga_common.h | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/include/configs/socfpga_common.h > b/include/configs/socfpga_common.h index f7c0eb5..7c50100 100644 > --- a/include/configs/socfpga_common.h > +++ b/include/configs/socfpga_common.h > @@ -300,6 +300,15 @@ unsigned int cm_get_qspi_controller_clk_hz(void); > "-@1536k(UBI)\0" > #endif > > +/* UBI and UBIFS support */ > +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND) > +#define CONFIG_CMD_UBI > +#define CONFIG_CMD_UBIFS > +#define CONFIG_RBTREE > +#define CONFIG_LZO > +#undef CONFIG_SPI_FLASH_USE_4K_SECTORS
This CONFIG_SPI_FLASH_USE_4K_SECTORS is Kconfig stuff, so it should go into configs/socfpga_* , otherwise this is fine. > +#endif > + > /* > * SPL > * Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
