[U-Boot] [PATCH 08/10] net: axi_emac: Enable access to MDIO in probe

[Michal Simek]

Detect phy when driver probes.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 drivers/net/xilinx_axi_emac.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index c03f8f730d3a..bff4d1b5affe 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -222,10 +222,10 @@ static u32 phywrite(struct axidma_priv *priv, u32 
phyaddress, u32 registernum,
 }
 
 /* Setting axi emac and phy to proper setting */
-static int setup_phy(struct udevice *dev)
+static int axiemac_phy_init(struct udevice *dev)
 {
        u16 phyreg;
-       u32 i, speed, emmc_reg, ret;
+       u32 i, ret;
        struct axidma_priv *priv = dev_get_priv(dev);
        struct axi_regs *regs = priv->iobase;
        struct phy_device *phydev;
@@ -237,6 +237,9 @@ static int setup_phy(struct udevice *dev)
                        SUPPORTED_1000baseT_Half |
                        SUPPORTED_1000baseT_Full;
 
+       /* Set default MDIO divisor */
+       out_be32(&regs->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK);
+
        if (priv->phyaddr == -1) {
                /* Detect the PHY address */
                for (i = 31; i >= 0; i--) {
@@ -259,6 +262,18 @@ static int setup_phy(struct udevice *dev)
        phydev->advertising = phydev->supported;
        priv->phydev = phydev;
        phy_config(phydev);
+
+       return 0;
+}
+
+/* Setting axi emac and phy to proper setting */
+static int setup_phy(struct udevice *dev)
+{
+       u32 speed, emmc_reg;
+       struct axidma_priv *priv = dev_get_priv(dev);
+       struct axi_regs *regs = priv->iobase;
+       struct phy_device *phydev = priv->phydev;
+
        if (phy_startup(phydev)) {
                printf("axiemac: could not initialize PHY %s\n",
                       phydev->dev->name);
@@ -358,6 +373,7 @@ static int axi_ethernet_init(struct axidma_priv *priv)
        /* Set default MDIO divisor */
        out_be32(&regs->mdio_mc, XAE_MDIO_DIV_DFT | XAE_MDIO_MC_MDIOEN_MASK);
 
+
        debug("axiemac: InitHw done\n");
        return 0;
 }
@@ -621,6 +637,8 @@ static int axi_emac_probe(struct udevice *dev)
        if (ret)
                return ret;
 
+       axiemac_phy_init(dev);
+
        return 0;
 }
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot