On Thu, Dec 10, 2015 at 6:58 AM, Michael Schanz <michael.sch...@congatec.com> wrote: > Use the macro SETUP_IOMUX_PAD(...) rather than > imx_iomux_v3_setup_multiple_pads(...) in order to setup > the pin configuration for ECSPI1. > > ARRAY_SIZE(pads) provides the wrong size for > imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in > case of MX6QDL. In the particular case, the content of GPR12 is overwritten > and the IPG/AHB/ATB/ATP clocks > are deactivated. Therefore, the connection to the system via JTAG is not > possible anymore. Furthermore, > kernel version 3.0.35 hangs during bootprocess in the function etm_init(). > > Signed-off-by: Michael Schanz <michael.sch...@congatec.com>
Acked-by: Otavio Salvador <ota...@ossystems.com.br> -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
