On 10/12/2015 09:58, Michael Schanz wrote: > Use the macro SETUP_IOMUX_PAD(...) rather than > imx_iomux_v3_setup_multiple_pads(...) in order to setup > the pin configuration for ECSPI1. > > ARRAY_SIZE(pads) provides the wrong size for > imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads)) in > case of MX6QDL. In the particular case, the content of GPR12 is overwritten > and the IPG/AHB/ATB/ATP clocks > are deactivated. Therefore, the connection to the system via JTAG is not > possible anymore. Furthermore, > kernel version 3.0.35 hangs during bootprocess in the function etm_init(). > > Signed-off-by: Michael Schanz <michael.sch...@congatec.com> > ---
Applied to u-boot-imx, thanks! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
