Dear Wolfgang, Wolfgang Denk wrote: > Dear Eric Benard, > > In message <1249816414-18989-1-git-send-email-e...@eukrea.com> you wrote: >> CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR >> flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII >> mode. > ... >> meesc \ >> diff --git a/Makefile b/Makefile >> index 54c0b67..2386cdc 100644 >> --- a/Makefile >> +++ b/Makefile >> @@ -2674,6 +2674,19 @@ at91rm9200ek_config : unconfig >> cmc_pu2_config : unconfig >> @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 >> >> +cpuat91_ram_config \ >> +cpuat91_config : unconfig >> + @mkdir -p $(obj)include >> + @if [ "$(findstring _ram_,$@)" ] ; then \ >> + echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> >> $(obj)include/config.h; \ >> + echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> >> $(obj)include/config.h; \ >> + $(XECHO) "... CPUAT91 configured for RAM" ; \ >> + else \ >> + echo "#define CONFIG_BOOTDELAY 1" >>$(obj)include/config.h ; \ >> + $(XECHO) "... CPUAT91 configured for Flash" ;\ >> + fi; >> + @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 >> + >> csb637_config : unconfig >> @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 > > Please do not add such scripting to the top level Makefile. Perform it > in your board config file instead.
Not sure if this is 'standard' for at91, but I saw something similar in http://git.denx.de/?p=u-boot/u-boot-arm.git;a=blobdiff;f=Makefile;h=c9d315ae98f2272659b88405cd2b94265f3bbfc3;hp=54c0b67499510f83fa642b9684ad95ce832de1b9;hb=f8ea12cf9be98508096dc4102a6ef40cb484fdd3;hpb=c6b5600aee06a13e556837c3065f7f8721d56ec9 Best regards Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
