SST parts added on sf_params.c supports both SST_WR which consits
of both BP and WP and there is a spi controller ich which supports
only BP so the relevent _write hook set based on "slave->op_mode_tx"
hence there is no respective change required from flash side hance
removed these.
Cc: Bin Meng <bmeng...@gmail.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index b8692c6..16dd45b 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -44,13 +44,10 @@ enum {
#endif
SECT_32K = 1 << 1,
E_FSR = 1 << 2,
- SST_BP = 1 << 3,
- SST_WP = 1 << 4,
- WR_QPP = 1 << 5,
+ SST_WR = 1 << 3,
+ WR_QPP = 1 << 4,
};
-#define SST_WR (SST_BP | SST_WP)
-
enum spi_nor_option_flags {
SNOR_F_SST_WR = (1 << 0),
SNOR_F_USE_FSR = (1 << 1),
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
