Using macro's for flash power up read-only access code
leads wrong behaviour hence use idcode0 for runtime
detection, hence the flash which require this functionality
gets detected at runtime.
Reviewed-by: Simon Glass <s...@chromium.org>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 1 +
drivers/mtd/spi/sf_ops.c | 7 +++----
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 8f586ee..b8692c6 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -66,6 +66,7 @@ enum spi_nor_option_flags {
#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2
#define SPI_FLASH_CFI_MFR_SST 0xbf
#define SPI_FLASH_CFI_MFR_WINBOND 0xef
+#define SPI_FLASH_CFI_MFR_ATMEL 0x1f
/* Erase commands */
#define CMD_ERASE_4K 0x20
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 853759e..e5514ab 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -941,11 +941,10 @@ int spi_flash_scan(struct spi_slave *spi, struct
spi_flash *flash)
}
/* Flash powers up read-only, so clear BP# bits */
-#if defined(CONFIG_SPI_FLASH_ATMEL) || \
- defined(CONFIG_SPI_FLASH_MACRONIX) || \
- defined(CONFIG_SPI_FLASH_SST)
+ if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
+ idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
+ idcode[0] == SPI_FLASH_CFI_MFR_SST)
write_sr(flash, 0);
-#endif
/* Assign spi data */
flash->spi = spi;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
