From: Tang Yuantian <yuantian.t...@freescale.com>
Freescale ARM-based Layerscape contains a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls2080aqds, ls2080ardb and
ls1043aqds boards.
Signed-off-by: Tang Yuantian <yuantian.t...@freescale.com>
---
v4:
- rebase to lastest git tree
- add another ARMv8 platform which is ls1043aqds
v3:
- rename ls2085a to ls2080a
- rebase to the latest git tree
- replace the magic number with micro variable
v2:
- rebase to the latest git tree
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 43 +++++++++++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 18 ++++++++++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 31 ++++++++++++++++
include/configs/ls1043aqds.h | 17 +++++++++
4 files changed, 109 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 8896b70..574ffc4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,6 +6,8 @@
#include <common.h>
#include <fsl_ifc.h>
+#include <ahci.h>
+#include <scsi.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
#include <asm/global_data.h>
@@ -120,7 +122,44 @@ void fsl_lsch3_early_init_f(void)
erratum_a009203();
}
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int sata_init(void)
+{
+ struct ccsr_ahci __iomem *ccsr_ahci;
+
+ ccsr_ahci = (void *)CONFIG_SYS_SATA2;
+ out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+ ccsr_ahci = (void *)CONFIG_SYS_SATA1;
+ out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+ ahci_init((void __iomem *)CONFIG_SYS_SATA1);
+ scsi_scan(0);
+
+ return 0;
+}
+#endif
+
#elif defined(CONFIG_LS1043A)
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int sata_init(void)
+{
+ struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
+
+ out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
+ out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
+ out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+ ahci_init((void __iomem *)CONFIG_SYS_SATA);
+ scsi_scan(0);
+
+ return 0;
+}
+#endif
+
void fsl_lsch2_early_init_f(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -141,6 +180,10 @@ void fsl_lsch2_early_init_f(void)
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
+#ifdef CONFIG_SCSI_AHCI_PLAT
+ sata_init();
+#endif
+
return 0;
}
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h
b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index b5a2d28..be3acc3 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -54,6 +54,24 @@
#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + 0x02200000)
+#define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + 0x02210000)
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x06000000
#define GICR_BASE 0x06100000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 504c1f9..83186d6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -51,6 +51,37 @@ struct cpu_type {
#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E)
#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1))
+/* ahci port register default value */
+#define AHCI_PORT_PHY_1_CFG 0xa003fffe
+#define AHCI_PORT_PHY_2_CFG 0x28184d1f
+#define AHCI_PORT_PHY_3_CFG 0x0e081509
+#define AHCI_PORT_TRANS_CFG 0x08000025
+
+/* AHCI (sata) register map */
+struct ccsr_ahci {
+ u32 res1[0xa4/4]; /* 0x0 - 0xa4 */
+ u32 pcfg; /* port config */
+ u32 ppcfg; /* port phy1 config */
+ u32 pp2c; /* port phy2 config */
+ u32 pp3c; /* port phy3 config */
+ u32 pp4c; /* port phy4 config */
+ u32 pp5c; /* port phy5 config */
+ u32 axicc; /* AXI cache control */
+ u32 paxic; /* port AXI config */
+ u32 axipc; /* AXI PROT control */
+ u32 ptc; /* port Trans Config */
+ u32 pts; /* port Trans Status */
+ u32 plc; /* port link config */
+ u32 plc1; /* port link config1 */
+ u32 plc2; /* port link config2 */
+ u32 pls; /* port link status */
+ u32 pls1; /* port link status1 */
+ u32 pcmdc; /* port CMD config */
+ u32 ppcs; /* port phy control status */
+ u32 pberr; /* port 0/1 BIST error */
+ u32 cmds; /* port 0/1 CMD status error */
+};
+
#ifdef CONFIG_FSL_LSCH3
void fsl_lsch3_early_init_f(void);
#elif defined(CONFIG_FSL_LSCH2)
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 4aeb238..bd7af00 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -88,6 +88,23 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FSL_PBL_RCW
board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
#endif
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA (CONFIG_SYS_IMMR +
0x02200000)
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
/*
* IFC Definitions
*/
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
