Hi Lin, On 20 October 2015 at 20:37, Lin Huang <h...@rock-chips.com> wrote: > it may not use SPL in other rockchip SOC, so move SUPPORT_SPL and > SPL config to rk3288 configuration. > > Signed-off-by: Lin Huang <h...@rock-chips.com> > --- > Changes in v1: None > > arch/arm/Kconfig | 2 -- > arch/arm/mach-rockchip/Kconfig | 2 ++ > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 194fb7b..40fa741 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -831,8 +831,6 @@ config TARGET_STM32F429_DISCOVERY > > config ARCH_ROCKCHIP > bool "Support Rockchip SoCs" > - select SUPPORT_SPL > - select SPL > select OF_CONTROL > select CPU_V7 > select DM > diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig > index ab50f4e..15cd380 100644 > --- a/arch/arm/mach-rockchip/Kconfig > +++ b/arch/arm/mach-rockchip/Kconfig > @@ -2,6 +2,8 @@ if ARCH_ROCKCHIP > > config ROCKCHIP_RK3288 > bool "Support Rockchip RK3288" > + select SUPPORT_SPL > + select SPL > help > The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 > including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two > -- > 1.9.1 >
We should avoid little binary blobs for booting the chip. I think we can live with this as a stepping stone to having a proper SPL, but what is the plan for a proper SPL in U-Boot? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot