Hi Simon,

On 22/10/15 22:07, Simon Glass wrote:
Hi Lin,

On 20 October 2015 at 20:37, Lin Huang <h...@rock-chips.com> wrote:
it may not use SPL in other rockchip SOC, so move SUPPORT_SPL and
SPL config to rk3288 configuration.

Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v1: None

  arch/arm/Kconfig               | 2 --
  arch/arm/mach-rockchip/Kconfig | 2 ++
  2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 194fb7b..40fa741 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -831,8 +831,6 @@ config TARGET_STM32F429_DISCOVERY

  config ARCH_ROCKCHIP
         bool "Support Rockchip SoCs"
-       select SUPPORT_SPL
-       select SPL
         select OF_CONTROL
         select CPU_V7
         select DM
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ab50f4e..15cd380 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -2,6 +2,8 @@ if ARCH_ROCKCHIP

  config ROCKCHIP_RK3288
         bool "Support Rockchip RK3288"
+       select SUPPORT_SPL
+       select SPL
         help
           The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
           including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
--
1.9.1

We should avoid little binary blobs for booting the chip. I think we
can live with this as a stepping stone to having a proper SPL, but
what is the plan for a proper SPL in U-Boot?

    Since rk3036 only 8K SRAM space, so there is not enough space to
use SPL to boot up Soc(i try to reduce spl space before, but it still too large for 8K), so i think rk3036 will use little binary blobs booting the soc, not use SUPPORT_SPL and
    SPL config, this is why i move these two config to sepcific Soc config.


Regards,
Simon




--
Lin Huang

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to