This patchset: - fixes trigger base & transfer start address register programming. This fix superseeds the previous patch "spi: cadence_qspi: Fix the indirect ahb trigger address setting". - adds support to get fifo width from device tree
Changes in v7: - added info for renaming the parameter from ahbbase to flashbase - created separate patch to remove the unused macro Changes in v6: - fixed binding for trigger-address. Changes in v5: - fixed compilation warnings. Changes in v4: - fifo-width & trigger address alligned to linux device tree binding. - removed un-necessary casting. - renaming of one parameter splitted to separate patch. - trigger address of socfpga reverted back to 0x0. - code formatting done to avoid checkpatch CHECKS. Changes in v3: - removed two patches which were bypassing the sram level check. - format string in patch corrected 3/4 - added commit message in patch 1/4 Changes in v2: - rebased to master. - removed patch "spi: cadence_qspi: read can be independent of fifo width", it was implemented in other patchset, in mainline now. Vikas Manocha (6): spi: cadence_qspi: move trigger base configuration in init spi: cadence_qspi: fix indirect read/write start address spi: cadence_qspi: fix base trigger address & transfer start address spi: cadence_qspi: rename ahbbase to flashbase for clarity spi: cadence_qspi: remove unused macro spi: cadence_qspi: get fifo width from device tree arch/arm/dts/socfpga.dtsi | 2 ++ arch/arm/dts/stv0991.dts | 2 ++ drivers/spi/cadence_qspi.c | 14 ++++++++------ drivers/spi/cadence_qspi.h | 6 ++++-- drivers/spi/cadence_qspi_apb.c | 42 ++++++++++++++++------------------------ 5 files changed, 33 insertions(+), 33 deletions(-) -- 1.7.9.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
