Dear Erik van Luijk, Erik van Luijk <evanlu...@interact.nl> writes: >Bootlog: >U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21) >mci: setting clock 258000 Hz, block size 512 >mci: setting clock 258000 Hz, block size 512 >mci: setting clock 258000 Hz, block size 512 >mci: setting clock 33024000 Hz, block size 512 >reading u-boot.img >reading u-boot.img > >U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000) > >CPU: AT91SAM9G45 >Crystal frequency: 12 MHz >CPU clock : 400 MHz >Master clock : 133.333 MHz > Watchdog enabled >DRAM: 256 MiB >WARNING: Caches not enabled >MMC: mci: 0 >mci: setting clock 260416 Hz, block size 512 >mci: setting clock 260416 Hz, block size 512 >mci: setting clock 260416 Hz, block size 512 >mci: setting clock 33333333 Hz, block size 512 >reading uboot.env >In: serial >Out: serial >Err: serial >Net: macb0 >Error: macb0 address not set. > >Hit any key to stop autoboot: 0 >U-Boot> > >Signed-off-by: Erik van Luijk <evanlu...@interact.nl> >[add 'picosam9g45_defconfig' to MAINTAINERS] >Signed-off-by: Andreas Bießmann <andreas.de...@googlemail.com> >--- > >Changes in v2: >- Enable watchdog >- Fix typo in lcd_show_board_info() > > arch/arm/include/asm/mach-types.h | 1 + > arch/arm/mach-at91/Kconfig | 6 + > board/mini-box/picosam9g45/Kconfig | 12 ++ > board/mini-box/picosam9g45/MAINTAINERS | 6 + > board/mini-box/picosam9g45/Makefile | 19 ++ > board/mini-box/picosam9g45/led.c | 25 +++ > board/mini-box/picosam9g45/picosam9g45.c | 354 +++++++++++++++++++++++++++++++ > configs/picosam9g45_defconfig | 12 ++ > include/configs/picosam9g45.h | 211 ++++++++++++++++++ > 9 files changed, 646 insertions(+) > create mode 100644 board/mini-box/picosam9g45/Kconfig > create mode 100644 board/mini-box/picosam9g45/MAINTAINERS > create mode 100644 board/mini-box/picosam9g45/Makefile > create mode 100644 board/mini-box/picosam9g45/led.c > create mode 100644 board/mini-box/picosam9g45/picosam9g45.c > create mode 100644 configs/picosam9g45_defconfig > create mode 100644 include/configs/picosam9g45.h
applied to u-boot-atmel/master, thanks! Fixed patch while applying and added one missing file to MAINTAINERS. Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
