Dear Erik van Luijk, Erik van Luijk <evanlu...@interact.nl> writes: >To enable the clocks on the at91 boards a constant (0x4) is used. >This is replaced with a define in at91_pmc.h (1 << 2). > >Signed-off-by: Erik van Luijk <evanlu...@interact.nl> >Reviewed-by: Andreas Bießmann <andreas.de...@googlemail.com> >--- > arch/arm/mach-at91/include/mach/at91_pmc.h | 1 + > board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- > board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +- > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +- > board/atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +- > board/atmel/sama5d3xek/sama5d3xek.c | 2 +- > board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +- > board/atmel/sama5d4ek/sama5d4ek.c | 2 +- > board/siemens/corvus/board.c | 2 +- > 9 files changed, 9 insertions(+), 8 deletions(-)
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
