Hi Stefano and Marek, Thanks for the suggestions.
On Thu, Aug 6, 2015 at 10:38 AM, Stefano Babic <sba...@denx.de> wrote: > There is the possibility to set a malloc area inside SPL: > > CONFIG_SYS_SPL_MALLOC_START > CONFIG_SYS_SPL_MALLOC_SIZE > you do not need a lot of space, and you can try to put it inside the IRAM. > > This should guarantee that spi_alloc_slave() works. So I tried moving them to the internal RAM: --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -70,8 +70,8 @@ #else #define CONFIG_SPL_BSS_START_ADDR 0x18200000 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x18300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3200000 /* 50 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x900000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000 #define CONFIG_SYS_TEXT_BASE 0x17800000 #endif #endif but still getting spi_alloc_slave() to fail. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
