On Thursday, August 06, 2015 at 03:25:22 PM, Fabio Estevam wrote: > Hi, > > I am trying to use spi_flash_probe() inside SPL on a custom mx6 board. > > The idea is to read some parameters from the SPI NOR flash and configure > the DDR accordingly. > > This is similar to what gw_ventana_spl.c does, but it reads from i2c > eeprom instead of SPI NOR. > > Here are the changes just to illustrate the problem:
I understand that you need to call spi_flash_probe() in board_init_f() at which point you still have no malloc() area available, so it fails with -ENOMEM or something like that, correct ? What you can probably try is to define CONFIG_SYS_MALLOC_F_LEN and do the following before doing spi_flash_probe(): static u8 array[128] __aligned(32); gd->malloc_limit = CONFIG_SYS_MALLOC_F_LEN; gd->malloc_ptr = array; This might work, but is nasty. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
