Hi Marcel,
On Wed, Jul 1, 2015 at 6:04 PM, Marcel Ziswiler <mar...@ziswiler.com> wrote:
> From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
>
> This patch fixes operation of our on-board AX88772B chip without EEPROM
> but with a ethaddr coming from the regular U-Boot environment. This is
> a forward port of some remaining parts initially implemented by
> Antmicro.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
> ---
> drivers/usb/eth/asix.c | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
> index c8697ae..3926d50 100644
> --- a/drivers/usb/eth/asix.c
> +++ b/drivers/usb/eth/asix.c
> @@ -1,5 +1,8 @@
> /*
> * Copyright (c) 2011 The Chromium OS Authors.
> + * Copyright (c) 2012-2014 Toradex, Inc.
> + *
> + * Patched for AX88772B by Antmicro Ltd <www.antmicro.com>
> *
> * SPDX-License-Identifier: GPL-2.0+
> */
> @@ -64,8 +67,14 @@
> AX_MEDIUM_AC | AX_MEDIUM_RE)
>
> /* AX88772 & AX88178 RX_CTL values */
> +#define AX_RX_CTL_RH2M 0x0200 /* Enable IP header in receive
> + buffer aligned on 32-bit
> + boundary */
Definitely use checkpatch.pl on this series. I recommend patman.
> +#define AX_RX_CTL_RH1M 0x0100 /* Enable RX-Header mode 0 */
> #define AX_RX_CTL_SO 0x0080
> #define AX_RX_CTL_AB 0x0008
> +#define AX_RX_HEADER_DEFAULT (AX_RX_CTL_RH1M | \
> + AX_RX_CTL_RH2M)
I'm guessing this is ported from the ASIX Linux driver. Perhaps
mention in the log where it came from.
>
> #define AX_DEFAULT_RX_CTL \
> (AX_RX_CTL_SO | AX_RX_CTL_AB)
> @@ -426,7 +435,15 @@ static int asix_init(struct eth_device *eth, bd_t *bd)
>
> debug("** %s()\n", __func__);
>
> - if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
> + if ((dev->pusb_dev->descriptor.idVendor == 0x0b95) &&
> + (dev->pusb_dev->descriptor.idProduct == 0x772b)) {
Please don't use magic numbers. Also, ideally don't create PID hacks.
> + if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL |
> + AX_RX_HEADER_DEFAULT) < 0)
> + goto out_err;
> + } else if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
> + goto out_err;
> +
> + if (asix_write_hwaddr(eth) < 0)
> goto out_err;
>
> do {
> @@ -447,6 +464,10 @@ static int asix_init(struct eth_device *eth, bd_t *bd)
> goto out_err;
> }
>
> + /* Wait some more to avoid timeout on first transfer
> + (e.g. EHCI timed out on TD - token=0x8008d80) */
> + udelay(25000);
Is this always needed or is it only helpful to your device?
> +
> return 0;
> out_err:
> return -1;
> @@ -533,6 +554,10 @@ static int asix_recv(struct eth_device *eth)
> return -1;
> }
>
> + if ((dev->pusb_dev->descriptor.idVendor == 0x0b95) &&
> + (dev->pusb_dev->descriptor.idProduct == 0x772b))
Again, Avoid PID hacks and at least magic numbers.
> + buf_ptr += 2;
> +
> /* Notify net stack */
> net_process_received_packet(buf_ptr + sizeof(packet_len),
> packet_len);
Thanks,
-Joe
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
