On 6/16/2015 4:55 PM, Jagan Teki wrote: > Pls- resend this series by adding Data Flash driver to it. In fact we only have Atmel Dataflash on ls1021aqds board. And I have add the "#define CONFIG_SF_DATAFLASH" in ls1021aqds.h. Please see below patch: [U-Boot,v3,3/4] arm: ls102xa: Enable Driver Model SPI for ls1021aqds
Best regards, Wang Haikun > > On 18 May 2015 at 18:55, Haikun Wang <haikun.w...@freescale.com> wrote: >> From: Haikun Wang <haikun.w...@freescale.com> >> >> Enable Driver Model SPI for ls1021atwr board. >> DSPI and QSPI only be enabled when boot from QSPI. >> DSPI and QSPI are compatible under Driver Model SPI. >> >> Signed-off-by: Haikun Wang <haikun.w...@freescale.com> >> Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d >> Reviewed-on: http://git.am.freescale.net:8181/33447 >> Tested-by: Review Code-CDREVIEW <cdrev...@freescale.com> >> Reviewed-by: Prabhakar Kushwaha <prabha...@freescale.com> >> --- >> Changes in v3: >> - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig, >> and DM core code use IS_ENABLED(), so configure option in head file >> can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM >> CONFIG_DM_SPI >> >> Changes in v2: >> - Move all changes inside of CONFIG_QSPI_BOOT >> >> Changes in v1: None >> include/configs/ls1021atwr.h | 10 ++++++++-- >> 1 file changed, 8 insertions(+), 2 deletions(-) >> >> diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h >> index 729205f..13e3aa4 100644 >> --- a/include/configs/ls1021atwr.h >> +++ b/include/configs/ls1021atwr.h >> @@ -229,16 +229,22 @@ >> #define CONFIG_CMD_FAT >> #define CONFIG_DOS_PARTITION >> >> -/* QSPI */ >> +/* SPI */ >> #ifdef CONFIG_QSPI_BOOT >> +/* QSPI */ >> #define CONFIG_FSL_QSPI >> #define QSPI0_AMBA_BASE 0x40000000 >> #define FSL_QSPI_FLASH_SIZE (1 << 24) >> #define FSL_QSPI_FLASH_NUM 2 >> >> +#define CONFIG_SPI_FLASH_STMICRO >> + >> +/* DM SPI */ >> +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) >> #define CONFIG_CMD_SF >> +#define CONFIG_DM_SPI_FLASH >> #define CONFIG_SPI_FLASH >> -#define CONFIG_SPI_FLASH_STMICRO >> +#endif >> #endif >> >> /* >> -- >> 2.1.0.27.g96db324 >> > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
