Pls- resend this series by adding Data Flash driver to it. On 18 May 2015 at 18:55, Haikun Wang <haikun.w...@freescale.com> wrote: > From: Haikun Wang <haikun.w...@freescale.com> > > Enable Driver Model SPI for ls1021atwr board. > DSPI and QSPI only be enabled when boot from QSPI. > DSPI and QSPI are compatible under Driver Model SPI. > > Signed-off-by: Haikun Wang <haikun.w...@freescale.com> > Change-Id: I6342807da7725ae8b678952117c8758c75a61d3d > Reviewed-on: http://git.am.freescale.net:8181/33447 > Tested-by: Review Code-CDREVIEW <cdrev...@freescale.com> > Reviewed-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > Changes in v3: > - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig, > and DM core code use IS_ENABLED(), so configure option in head file > can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM > CONFIG_DM_SPI > > Changes in v2: > - Move all changes inside of CONFIG_QSPI_BOOT > > Changes in v1: None > include/configs/ls1021atwr.h | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h > index 729205f..13e3aa4 100644 > --- a/include/configs/ls1021atwr.h > +++ b/include/configs/ls1021atwr.h > @@ -229,16 +229,22 @@ > #define CONFIG_CMD_FAT > #define CONFIG_DOS_PARTITION > > -/* QSPI */ > +/* SPI */ > #ifdef CONFIG_QSPI_BOOT > +/* QSPI */ > #define CONFIG_FSL_QSPI > #define QSPI0_AMBA_BASE 0x40000000 > #define FSL_QSPI_FLASH_SIZE (1 << 24) > #define FSL_QSPI_FLASH_NUM 2 > > +#define CONFIG_SPI_FLASH_STMICRO > + > +/* DM SPI */ > +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) > #define CONFIG_CMD_SF > +#define CONFIG_DM_SPI_FLASH > #define CONFIG_SPI_FLASH > -#define CONFIG_SPI_FLASH_STMICRO > +#endif > #endif > > /* > -- > 2.1.0.27.g96db324 >
-- Jagan | openedev. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
