Hi Fabio, Alexander, On 23/05/2015 18:27, Alexander Holler wrote: > Am 23.05.2015 um 02:38 schrieb Vagrant Cascadian: >> On 2015-05-21, Fabio Estevam wrote: >>> From: Fabio Estevam <fabio.este...@freescale.com> >>> >>> There are two revisions of wandboard: version B1 and C1. >>> >>> Add the revision detection support, so that the correct dtb file can >>> be automatically loaded. >>> >>> Based on the patch from Richard Hu <hak...@gmail.com>. >>> >>> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> >> >> Tested on a Wandboard dual (rev c1) and wandboard quad (rev b1). >> >> Tested-By: Vagrant Cascadian <vagr...@aikidev.net> >> >>> --- >>> Changes since v1: >>> >>> - Fixed commit log to 'automatically loaded'. >>> >>> board/wandboard/wandboard.c | 26 +++++++++++++++++++++++++- >>> include/configs/wandboard.h | 8 ++++++-- > > Wouldn't it be better to just enable CONFIG_CMD_GPIO and then change the > boot-script in the config to something like "if gpio ..." instead of > adding something special? > > Assuming the gpio command works on imx, which I haven't tested or looked > up.
gpio works - this is really a good idea, moving the check into the script. Fabio, what do you mind ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
