Hi Tim, On 09/05/2015 03:28, Tim Harvey wrote: > This collection of patches comprises a set of various updates I've been > on for Ventana. > > In summary: > - enable driver model > - enable gpio command > - enable dm-serial > - enable thermal support > - fixup for GW522x PCI enumeration > - split out common code shared between SPL an U-Boot > - pull down various init code to the SPL for use in Falcon mode > - enable Falcon mode (based on env var) > > The enabling of Falcon mode is dependent on a patch I submitted earlier > allowing nand env in spl [1]. > > Currently Falcon mode is configured for NAND boot. I plan on re-working > a pending patchset I have that allows dynamic env support (use mmc or nand > env depending on boot device) but I still need to re-work that using > driver-model so it will come later. > > I will send a followup patch with README updates explaining our use of Falcon > mode if everything here looks good. > > Tim > > [1] https://patchwork.ozlabs.org/patch/470191/ > > Tim Harvey (19): > imx: ventana: set dtype env var to boot media > imx: ventana: display SPL boot device > imx: ventana: config: enable gpio command > imx: ventana: config: enable driver model > imx: ventana: register gpio's with gpio_request > imx: ventana: enable DM_SERIAL > imx: ventana: config: enable Thermal support > imx: ventana: config: use MMC SPL RAW support > imx: ventana: (cosmetic) clean up size defines for improved > readability > imx: ventana: fix pcie reset for GW522x > imx: ventana: default msata/pci mux to pci before PCI enumeration > imx: ventana: split out common functions between SPL and uboot > imx: ventana: move GSC boot watchdog disable function to gsc.c > imx: ventana: detect pmic using i2c probe instead of board model > imx: ventana: use common uart and i2c setup functions in SPL > imx: ventana: add gpio setup to SPL > imx: ventana: add pmic_setup to SPL > imx: ventana: add GSC boot watchdog disable to SPL > imx: ventana: config: enable Falcon mode > > board/gateworks/gw_ventana/Makefile | 2 +- > board/gateworks/gw_ventana/common.c | 827 +++++++++++++++++++++++++ > board/gateworks/gw_ventana/common.h | 98 +++ > board/gateworks/gw_ventana/gsc.c | 27 + > board/gateworks/gw_ventana/gsc.h | 1 + > board/gateworks/gw_ventana/gw_ventana.c | 911 > ++-------------------------- > board/gateworks/gw_ventana/gw_ventana_spl.c | 103 ++-- > include/configs/gw_ventana.h | 67 +- > 8 files changed, 1102 insertions(+), 934 deletions(-) > create mode 100644 board/gateworks/gw_ventana/common.c > create mode 100644 board/gateworks/gw_ventana/common.h >
Patches 1-7, 10-16, 18 applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot