Hi Masahiro-san, On Sun, May 10, 2015 at 8:38 PM, Masahiro Yamada <yamada.masah...@socionext.com> wrote: > Hi. > > > > 2015-05-11 5:23 GMT+09:00 Joe Hershberger <joe.hershber...@ni.com>: >> Removing this board because it does not build with any tool-chain that >> we know of. >> >> The board fails to build with the tool-chain available at kernel.org: >> https://www.kernel.org/pub/tools/crosstool/files/bin/i686/4.6.3/i686-gcc-4.6.3-nolibc_sh4-linux.tar.xz >> >> It fails with the following errors: >> sh4-linux-gcc: error: command line option '-m2a' is not supported by this >> configuration >> sh4-linux-gcc: error: command line option '-m2a-nofpu' is not supported by >> this configuration >> >> Signed-off-by: Joe Hershberger <joe.hershber...@ni.com> >> Cc: Phil Edworthy <phil.edwor...@renesas.com> > > > > I know a tool-chain that can build this board. > > > This is pre-built toolchains created by Mike Frysinger: > http://dev.gentoo.org/~vapier/u-boot/ > > > I tried "CROSS_COMPILE=sh4-gentoo-linux ./MAKEALL -a sh" > and I got > > --------------------- SUMMARY ---------------------------- > Boards compiled: 22 > Boards with warnings but no errors: 3 ( sh7753evb sh7785lcr sh7785lcr_32bit ) > ----------------------------------------------------------
Interestingly, these 3 boards build fine with with the kernel.org toolchain > I propose to wait a while to give Nobuhiro a chance to suggest > suitable toolchains. It has been 7 months already. http://lists.denx.de/pipermail/u-boot/2014-September/188886.html > My question is, all the boards should be built with the kernel.org toolchains? I don't know that it need be a requirement, but it would be nice to have a list on the wiki of what certainly works. A few I had to build from buildroot to get it working. Some are not even on kernel.org. Some must come from vendors. It seems you have a slightly different set of tool-chains based on your mapping in the moveconfig script. It seems it can't be perfectly simple. :/ Cheers, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
