Removing this board because it does not build with any tool-chain that we know of.
The board fails to build with the tool-chain available at kernel.org: https://www.kernel.org/pub/tools/crosstool/files/bin/i686/4.6.3/i686-gcc-4.6.3-nolibc_sh4-linux.tar.xz It fails with the following error: sh4-linux-gcc: error: command line option '-m3' is not supported by this configuration Signed-off-by: Joe Hershberger <joe.hershber...@ni.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> --- arch/sh/Kconfig | 5 - arch/sh/include/asm/cpu_sh3.h | 2 - arch/sh/include/asm/cpu_sh7720.h | 207 --------------------------------------- board/ms7720se/Kconfig | 9 -- board/ms7720se/MAINTAINERS | 6 -- board/ms7720se/Makefile | 16 --- board/ms7720se/lowlevel_init.S | 185 ---------------------------------- board/ms7720se/ms7720se.c | 46 --------- configs/ms7720se_defconfig | 2 - doc/README.sh | 16 +-- drivers/serial/serial_sh.h | 8 +- include/configs/ms7720se.h | 109 --------------------- 12 files changed, 3 insertions(+), 608 deletions(-) delete mode 100644 arch/sh/include/asm/cpu_sh7720.h delete mode 100644 board/ms7720se/Kconfig delete mode 100644 board/ms7720se/MAINTAINERS delete mode 100644 board/ms7720se/Makefile delete mode 100644 board/ms7720se/lowlevel_init.S delete mode 100644 board/ms7720se/ms7720se.c delete mode 100644 configs/ms7720se_defconfig delete mode 100644 include/configs/ms7720se.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 119db89..a4a32b2 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -23,10 +23,6 @@ config SH_32BIT choice prompt "Target select" -config TARGET_MS7720SE - bool "Support ms7720se" - select CPU_SH3 - config TARGET_SHMIN bool "SHMIN" select CPU_SH3 @@ -105,7 +101,6 @@ config USE_PRIVATE_LIBGCC source "board/alphaproject/ap_sh4a_4a/Kconfig" source "board/espt/Kconfig" -source "board/ms7720se/Kconfig" source "board/ms7722se/Kconfig" source "board/ms7750se/Kconfig" source "board/renesas/MigoR/Kconfig" diff --git a/arch/sh/include/asm/cpu_sh3.h b/arch/sh/include/asm/cpu_sh3.h index 0c85e94..443aaeb 100644 --- a/arch/sh/include/asm/cpu_sh3.h +++ b/arch/sh/include/asm/cpu_sh3.h @@ -22,8 +22,6 @@ #include <asm/cpu_sh7706.h> #elif defined(CONFIG_CPU_SH7710) #include <asm/cpu_sh7710.h> -#elif defined(CONFIG_CPU_SH7720) -#include <asm/cpu_sh7720.h> #else #error "Unknown SH3 variant" #endif diff --git a/arch/sh/include/asm/cpu_sh7720.h b/arch/sh/include/asm/cpu_sh7720.h deleted file mode 100644 index 6a861bd..0000000 --- a/arch/sh/include/asm/cpu_sh7720.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright 2007 (C) - * Yoshihiro Shimoda <shimoda.yoshih...@renesas.com> - * - * Copyright 2008 (C) - * Mark Jonas <mark.jo...@de.bosch.com> - * - * SH7720 Internal I/O register - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ASM_CPU_SH7720_H_ -#define _ASM_CPU_SH7720_H_ - -#define CACHE_OC_NUM_WAYS 4 -#define CCR_CACHE_INIT 0x0000000B - -/* EXP */ -#define TRA 0xFFFFFFD0 -#define EXPEVT 0xFFFFFFD4 -#define INTEVT 0xFFFFFFD8 - -/* MMU */ -#define MMUCR 0xFFFFFFE0 -#define PTEH 0xFFFFFFF0 -#define PTEL 0xFFFFFFF4 -#define TTB 0xFFFFFFF8 - -/* CACHE */ -#define CCR 0xFFFFFFEC - -/* INTC */ -#define IPRF 0xA4080000 -#define IPRG 0xA4080002 -#define IPRH 0xA4080004 -#define IPRI 0xA4080006 -#define IPRJ 0xA4080008 -#define IRR5 0xA4080020 -#define IRR6 0xA4080022 -#define IRR7 0xA4080024 -#define IRR8 0xA4080026 -#define IRR9 0xA4080028 -#define IRR0 0xA4140004 -#define IRR1 0xA4140006 -#define IRR2 0xA4140008 -#define IRR3 0xA414000A -#define IRR4 0xA414000C -#define ICR1 0xA4140010 -#define ICR2 0xA4140012 -#define PINTER 0xA4140014 -#define IPRC 0xA4140016 -#define IPRD 0xA4140018 -#define IPRE 0xA414001A -#define ICR0 0xA414FEE0 -#define IPRA 0xA414FEE2 -#define IPRB 0xA414FEE4 - -/* BSC */ -#define BSC_BASE 0xA4FD0000 -#define CMNCR (BSC_BASE + 0x00) -#define CS0BCR (BSC_BASE + 0x04) -#define CS2BCR (BSC_BASE + 0x08) -#define CS3BCR (BSC_BASE + 0x0C) -#define CS4BCR (BSC_BASE + 0x10) -#define CS5ABCR (BSC_BASE + 0x14) -#define CS5BBCR (BSC_BASE + 0x18) -#define CS6ABCR (BSC_BASE + 0x1C) -#define CS6BBCR (BSC_BASE + 0x20) -#define CS0WCR (BSC_BASE + 0x24) -#define CS2WCR (BSC_BASE + 0x28) -#define CS3WCR (BSC_BASE + 0x2C) -#define CS4WCR (BSC_BASE + 0x30) -#define CS5AWCR (BSC_BASE + 0x34) -#define CS5BWCR (BSC_BASE + 0x38) -#define CS6AWCR (BSC_BASE + 0x3C) -#define CS6BWCR (BSC_BASE + 0x40) -#define SDCR (BSC_BASE + 0x44) -#define RTCSR (BSC_BASE + 0x48) -#define RTCNR (BSC_BASE + 0x4C) -#define RTCOR (BSC_BASE + 0x50) -#define SDMR2 (BSC_BASE + 0x4000) -#define SDMR3 (BSC_BASE + 0x5000) - -/* DMAC */ - -/* CPG */ -#define UCLKCR 0xA40A0008 -#define FRQCR 0xA415FF80 - -/* LOW POWER MODE */ - -/* TMU */ -#define TMU_BASE 0xA412FE90 - -/* TPU */ -#define TPU_BASE 0xA4480000 -#define TPU_TSTR (TPU_BASE + 0x00) -#define TPU_TCR0 (TPU_BASE + 0x10) -#define TPU_TMDR0 (TPU_BASE + 0x14) -#define TPU_TIOR0 (TPU_BASE + 0x18) -#define TPU_TIER0 (TPU_BASE + 0x1C) -#define TPU_TSR0 (TPU_BASE + 0x20) -#define TPU_TCNT0 (TPU_BASE + 0x24) -#define TPU_TGRA0 (TPU_BASE + 0x28) -#define TPU_TGRB0 (TPU_BASE + 0x2C) -#define TPU_TGRC0 (TPU_BASE + 0x30) -#define TPU_TGRD0 (TPU_BASE + 0x34) -#define TPU_TCR1 (TPU_BASE + 0x50) -#define TPU_TMDR1 (TPU_BASE + 0x54) -#define TPU_TIOR1 (TPU_BASE + 0x58) -#define TPU_TIER1 (TPU_BASE + 0x5C) -#define TPU_TSR1 (TPU_BASE + 0x60) -#define TPU_TCNT1 (TPU_BASE + 0x64) -#define TPU_TGRA1 (TPU_BASE + 0x68) -#define TPU_TGRB1 (TPU_BASE + 0x6C) -#define TPU_TGRC1 (TPU_BASE + 0x70) -#define TPU_TGRD1 (TPU_BASE + 0x74) -#define TPU_TCR2 (TPU_BASE + 0x90) -#define TPU_TMDR2 (TPU_BASE + 0x94) -#define TPU_TIOR2 (TPU_BASE + 0x98) -#define TPU_TIER2 (TPU_BASE + 0x9C) -#define TPU_TSR2 (TPU_BASE + 0xB0) -#define TPU_TCNT2 (TPU_BASE + 0xB4) -#define TPU_TGRA2 (TPU_BASE + 0xB8) -#define TPU_TGRB2 (TPU_BASE + 0xBC) -#define TPU_TGRC2 (TPU_BASE + 0xC0) -#define TPU_TGRD2 (TPU_BASE + 0xC4) -#define TPU_TCR3 (TPU_BASE + 0xD0) -#define TPU_TMDR3 (TPU_BASE + 0xD4) -#define TPU_TIOR3 (TPU_BASE + 0xD8) -#define TPU_TIER3 (TPU_BASE + 0xDC) -#define TPU_TSR3 (TPU_BASE + 0xE0) -#define TPU_TCNT3 (TPU_BASE + 0xE4) -#define TPU_TGRA3 (TPU_BASE + 0xE8) -#define TPU_TGRB3 (TPU_BASE + 0xEC) -#define TPU_TGRC3 (TPU_BASE + 0xF0) -#define TPU_TGRD3 (TPU_BASE + 0xF4) - -/* CMT */ - -/* SIOF */ - -/* SCIF */ -#define SCIF0_BASE 0xA4430000 - -/* SIM */ - -/* IrDA */ - -/* IIC */ - -/* LCDC */ - -/* USBF */ - -/* MMCIF */ - -/* PFC */ -#define PFC_BASE 0xA4050100 -#define PACR (PFC_BASE + 0x00) -#define PBCR (PFC_BASE + 0x02) -#define PCCR (PFC_BASE + 0x04) -#define PDCR (PFC_BASE + 0x06) -#define PECR (PFC_BASE + 0x08) -#define PFCR (PFC_BASE + 0x0A) -#define PGCR (PFC_BASE + 0x0C) -#define PHCR (PFC_BASE + 0x0E) -#define PJCR (PFC_BASE + 0x10) -#define PKCR (PFC_BASE + 0x12) -#define PLCR (PFC_BASE + 0x14) -#define PMCR (PFC_BASE + 0x16) -#define PPCR (PFC_BASE + 0x18) -#define PRCR (PFC_BASE + 0x1A) -#define PSCR (PFC_BASE + 0x1C) -#define PTCR (PFC_BASE + 0x1E) -#define PUCR (PFC_BASE + 0x20) -#define PVCR (PFC_BASE + 0x22) -#define PSELA (PFC_BASE + 0x24) -#define PSELB (PFC_BASE + 0x26) -#define PSELC (PFC_BASE + 0x28) -#define PSELD (PFC_BASE + 0x2A) - -/* I/O Port */ -#define PORT_BASE 0xA4050100 -#define PADR (PORT_BASE + 0x40) -#define PBDR (PORT_BASE + 0x42) -#define PCDR (PORT_BASE + 0x44) -#define PDDR (PORT_BASE + 0x46) -#define PEDR (PORT_BASE + 0x48) -#define PFDR (PORT_BASE + 0x4A) -#define PGDR (PORT_BASE + 0x4C) -#define PHDR (PORT_BASE + 0x4E) -#define PJDR (PORT_BASE + 0x50) -#define PKDR (PORT_BASE + 0x52) -#define PLDR (PORT_BASE + 0x54) -#define PMDR (PORT_BASE + 0x56) -#define PPDR (PORT_BASE + 0x58) -#define PRDR (PORT_BASE + 0x5A) -#define PSDR (PORT_BASE + 0x5C) -#define PTDR (PORT_BASE + 0x5E) -#define PUDR (PORT_BASE + 0x60) -#define PVDR (PORT_BASE + 0x62) - -/* H-UDI */ - -#endif /* _ASM_CPU_SH7720_H_ */ diff --git a/board/ms7720se/Kconfig b/board/ms7720se/Kconfig deleted file mode 100644 index 8331327..0000000 --- a/board/ms7720se/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MS7720SE - -config SYS_BOARD - default "ms7720se" - -config SYS_CONFIG_NAME - default "ms7720se" - -endif diff --git a/board/ms7720se/MAINTAINERS b/board/ms7720se/MAINTAINERS deleted file mode 100644 index 96a80f4..0000000 --- a/board/ms7720se/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MS7720SE BOARD -M: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> -S: Maintained -F: board/ms7720se/ -F: include/configs/ms7720se.h -F: configs/ms7720se_defconfig diff --git a/board/ms7720se/Makefile b/board/ms7720se/Makefile deleted file mode 100644 index 1819c4c..0000000 --- a/board/ms7720se/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Copyright (C) 2007 -# Yoshihiro Shimoda <shimoda.yoshih...@renesas.com> -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu <iwama...@nigauri.org> -# -# Copyright (C) 2007 -# Kenati Technologies, Inc. -# -# board/ms7720se/Makefile -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := ms7720se.o -obj-y += lowlevel_init.o diff --git a/board/ms7720se/lowlevel_init.S b/board/ms7720se/lowlevel_init.S deleted file mode 100644 index 3f3d21e..0000000 --- a/board/ms7720se/lowlevel_init.S +++ /dev/null @@ -1,185 +0,0 @@ -/* - * (C) Copyright 2007 - * Yoshihiro Shimoda <shimoda.yoshih...@renesas.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/macro.h> - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - write16 WTCSR_A, WTCSR_D - - write16 WTCNT_A, WTCNT_D - - write16 FRQCR_A, FRQCR_D - - write16 UCLKCR_A, UCLKCR_D - - write32 CMNCR_A, CMNCR_D - - write32 CMNCR_A, CMNCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS2BCR_A, CS2BCR_D - - write32 CS3BCR_A, CS3BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5ABCR_A, CS5ABCR_D - - write32 CS5BBCR_A, CS5BBCR_D - - write32 CS6ABCR_A, CS6ABCR_D - - write32 CS6BBCR_A, CS6BBCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS2WCR_A, CS2WCR_D - - write32 CS3WCR_A, CS3WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5AWCR_A, CS5AWCR_D - - write32 CS5BWCR_A, CS5BWCR_D - - write32 CS6AWCR_A, CS6AWCR_D - - write32 CS6BWCR_A, CS6BWCR_D - - write32 SDCR_A, SDCR_D1 - - write32 RTCSR_A, RTCSR_D - - write32 RTCNT_A RTCNT_D - - write32 RTCOR_A, RTCOR_D - - write32 SDCR_A, SDCR_D2 - - write16 SDMR3_A, SDMR3_D - - write16 PCCR_A, PCCR_D - - write16 PDCR_A, PDCR_D - - write16 PECR_A, PECR_D - - write16 PGCR_A, PGCR_D - - write16 PHCR_A, PHCR_D - - write16 PPCR_A, PPCR_D - - write16 PTCR_A, PTCR_D - - write16 PVCR_A, PVCR_D - - write16 PSELA_A, PSELA_D - - write32 CCR_A, CCR_D - - write8 LED_A, LED_D - - rts - nop - - .align 4 - -FRQCR_A: .long 0xA415FF80 /* FRQCR Address */ -WTCNT_A: .long 0xA415FF84 -WTCSR_A: .long 0xA415FF86 -UCLKCR_A: .long 0xA40A0008 -FRQCR_D: .word 0x1103 /* I:B:P=8:4:2 */ -WTCNT_D: .word 0x5A00 -WTCSR_D: .word 0xA506 -UCLKCR_D: .word 0xA5C0 - -#define BSC_BASE 0xA4FD0000 -CMNCR_A: .long BSC_BASE -CS0BCR_A: .long BSC_BASE + 0x04 -CS2BCR_A: .long BSC_BASE + 0x08 -CS3BCR_A: .long BSC_BASE + 0x0C -CS4BCR_A: .long BSC_BASE + 0x10 -CS5ABCR_A: .long BSC_BASE + 0x14 -CS5BBCR_A: .long BSC_BASE + 0x18 -CS6ABCR_A: .long BSC_BASE + 0x1C -CS6BBCR_A: .long BSC_BASE + 0x20 -CS0WCR_A: .long BSC_BASE + 0x24 -CS2WCR_A: .long BSC_BASE + 0x28 -CS3WCR_A: .long BSC_BASE + 0x2C -CS4WCR_A: .long BSC_BASE + 0x30 -CS5AWCR_A: .long BSC_BASE + 0x34 -CS5BWCR_A: .long BSC_BASE + 0x38 -CS6AWCR_A: .long BSC_BASE + 0x3C -CS6BWCR_A: .long BSC_BASE + 0x40 -SDCR_A: .long BSC_BASE + 0x44 -RTCSR_A: .long BSC_BASE + 0x48 -RTCNT_A: .long BSC_BASE + 0x4C -RTCOR_A: .long BSC_BASE + 0x50 -SDMR3_A: .long BSC_BASE + 0x58C0 - -CMNCR_D: .long 0x00000010 -CS0BCR_D: .long 0x36DB0400 -CS2BCR_D: .long 0x36DB0400 -CS3BCR_D: .long 0x36DB4600 -CS4BCR_D: .long 0x36DB0400 -CS5ABCR_D: .long 0x36DB0400 -CS5BBCR_D: .long 0x36DB0200 -CS6ABCR_D: .long 0x36DB0400 -CS6BBCR_D: .long 0x36DB0400 -CS0WCR_D: .long 0x00000B01 -CS2WCR_D: .long 0x00000500 -CS3WCR_D: .long 0x00006D1B -CS4WCR_D: .long 0x00000500 -CS5AWCR_D: .long 0x00000500 -CS5BWCR_D: .long 0x00000500 -CS6AWCR_D: .long 0x00000500 -CS6BWCR_D: .long 0x00000500 -SDCR_D1: .long 0x00000011 -RTCSR_D: .long 0xA55A0010 -RTCNT_D: .long 0xA55A001F -RTCOR_D: .long 0xA55A001F -SDMR3_D: .word 0x0000 -.align 2 -SDCR_D2: .long 0x00000811 - -#define PFC_BASE 0xA4050100 -PCCR_A: .long PFC_BASE + 0x04 -PDCR_A: .long PFC_BASE + 0x06 -PECR_A: .long PFC_BASE + 0x08 -PGCR_A: .long PFC_BASE + 0x0C -PHCR_A: .long PFC_BASE + 0x0E -PPCR_A: .long PFC_BASE + 0x18 -PTCR_A: .long PFC_BASE + 0x1E -PVCR_A: .long PFC_BASE + 0x22 -PSELA_A: .long PFC_BASE + 0x24 - -PCCR_D: .word 0x0000 -PDCR_D: .word 0x0000 -PECR_D: .word 0x0000 -PGCR_D: .word 0x0000 -PHCR_D: .word 0x0000 -PPCR_D: .word 0x00AA -PTCR_D: .word 0x0280 -PVCR_D: .word 0x0000 -PSELA_D: .word 0x0000 -.align 2 - -CCR_A: .long 0xFFFFFFEC -!CCR_D: .long 0x0000000D -CCR_D: .long 0x0000000B - -LED_A: .long 0xB6800000 -LED_D: .long 0xFF diff --git a/board/ms7720se/ms7720se.c b/board/ms7720se/ms7720se.c deleted file mode 100644 index 534a422..0000000 --- a/board/ms7720se/ms7720se.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2007 - * Yoshihiro Shimoda <shimoda.yoshih...@renesas.com> - * - * Copyright (C) 2007 - * Nobuhiro Iwamatsu <iwama...@nigauri.org> - * - * Copyright (C) 2007 - * Kenati Technologies, Inc. - * - * board/ms7720se/ms7720se.c - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define LED_BASE 0xB0800000 - -int checkboard(void) -{ - puts("BOARD: Hitachi UL MS7720SE\n"); - return 0; -} - -int board_init(void) -{ - return 0; -} - -int dram_init(void) -{ - gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; - printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024)); - return 0; -} - -void led_set_state(unsigned short value) -{ - outw(value & 0xFF, LED_BASE); -} diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig deleted file mode 100644 index 0e3f834..0000000 --- a/configs/ms7720se_defconfig +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_SH=y -CONFIG_TARGET_MS7720SE=y diff --git a/doc/README.sh b/doc/README.sh index 6baee08..eff6be8 100644 --- a/doc/README.sh +++ b/doc/README.sh @@ -23,13 +23,10 @@ U-Boot for Renesas SuperH 2.2. Renesas SH7722 This CPU has the SH4AL-DSP core. - 2.3. Renesas SH7720 - This CPU has the SH3 core. - - 2.4. Renesas SH7710/SH7712 + 2.3. Renesas SH7710/SH7712 This CPU has the SH3-DSP core and Ethernet controller. - 2.5. Renesas SH7780 + 2.4. Renesas SH7780 This CPU has the SH4A core. ================================================================================ @@ -54,15 +51,6 @@ U-Boot for Renesas SuperH - Marubun PCMCIA - SMC91x ethernet - 3.2. Hitachi UL MS7720ERP01 - Board specific code is in board/ms7720se - To use this board, type "make ms7720se_config". - Support devices are : - - SCIF - - SDRAM - - NOR Flash - - Marubun PCMCIA - 3.3. Renesas R7780MP Board specific code is in board/r7780mp To use this board, type "make r7780mp_config". diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index 8cefa65..5f3473f 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -39,8 +39,7 @@ struct uart_port { * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -#elif defined(CONFIG_CPU_SH7720) || \ - defined(CONFIG_CPU_SH7721) || \ +#elif defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) || \ @@ -284,7 +283,6 @@ struct uart_port { #define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ #if defined(CONFIG_CPU_SH7705) || \ - defined(CONFIG_CPU_SH7720) || \ defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ @@ -334,7 +332,6 @@ struct uart_port { (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) #if defined(CONFIG_CPU_SH7705) || \ - defined(CONFIG_CPU_SH7720) || \ defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ @@ -449,7 +446,6 @@ static inline void sci_##name##_out(struct uart_port *port,\ sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #elif defined(CONFIG_CPU_SH7705) || \ - defined(CONFIG_CPU_SH7720) || \ defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ @@ -507,7 +503,6 @@ static inline void sci_##name##_out(struct uart_port *port,\ #endif #if defined(CONFIG_CPU_SH7705) || \ - defined(CONFIG_CPU_SH7720) || \ defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ @@ -719,7 +714,6 @@ static inline int sci_rxd_in(struct uart_port *port) !defined(CONFIG_SH_SH2007) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SH7705) || \ - defined(CONFIG_CPU_SH7720) || \ defined(CONFIG_CPU_SH7721) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h deleted file mode 100644 index 585d68f..0000000 --- a/include/configs/ms7720se.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Configuation settings for the Hitachi Solution Engine 7720 - * - * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshih...@renesas.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MS7720SE_H -#define __MS7720SE_H - -#define CONFIG_CPU_SH7720 1 -#define CONFIG_MS7720SE 1 - -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_PCMCIA -#define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS "console=ttySC0,115200" -#define CONFIG_BOOTFILE "/boot/zImage" -#define CONFIG_LOADADDR 0x8E000000 - -#define CONFIG_VERSION_VARIABLE -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* MEMORY */ -#define MS7720SE_SDRAM_BASE 0x8C000000 -#define MS7720SE_FLASH_BASE_1 0xA0000000 -#define MS7720SE_FLASH_BANK_SIZE (8 * 1024 * 1024) - -#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ -#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ -#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ -/* Buffer size for Boot Arguments passed to kernel */ -#define CONFIG_SYS_BARGSIZE 512 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_SCIF_CONSOLE 1 -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_SYS_MEMTEST_START MS7720SE_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -#define CONFIG_SYS_SDRAM_BASE MS7720SE_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE MS7720SE_FLASH_BASE_1 -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - - -/* FLASH */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_BASE MS7720SE_FLASH_BASE_1 - -#define CONFIG_SYS_MAX_FLASH_SECT 150 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ - -/* PCMCIA */ -#define CONFIG_IDE_PCMCIA 1 -#define CONFIG_MARUBUN_PCCARD 1 -#define CONFIG_PCMCIA_SLOT_A 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_MARUBUN_MRSHPC 0xb83fffe0 -#define CONFIG_SYS_MARUBUN_MW1 0xb8400000 -#define CONFIG_SYS_MARUBUN_MW2 0xb8500000 -#define CONFIG_SYS_MARUBUN_IO 0xb8600000 - -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_MARUBUN_IO /* base address */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO - -#endif /* __MS7720SE_H */ -- 1.7.11.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
