2015-05-07 17:55 GMT+02:00 Tim Harvey <thar...@gateworks.com>: > On Tue, Apr 28, 2015 at 10:31 AM, Tim Harvey <thar...@gateworks.com> wrote: >> On Tue, Apr 28, 2015 at 10:11 AM, Stefan Roese <s...@denx.de> wrote: >>> Hi Tim, >>> >>> On 28.04.2015 17:44, Tim Harvey wrote: >>>> >>>> The MX6 has OTP bits specifying the processor speed grade as well as >>>> temperature grade. >>>> >>>> This series adds functions to return this information as well as adds the >>>> details to the CPU info displayed. >>>> >>>> Additionally we use the temperature grade to replace the hard-coded limits >>>> in imx_thermal.c >>>> >>>> I expect some possible discussion/debate regarding the displaying of this >>>> info, >>>> but perhaps adding the functions to obtain the info and use it for >>>> imx_thermal >>>> is beyond debate. Please let me know. >>> >>> >>> Could you please send (or include in the commit text) an example, how these >>> infos are displayed now in the bootup log? Best in comparison to the "old" >>> log. To see the output change resulting from the patchset. >>> >>> Thanks, >>> Stefan >>> >> >> Stefan, >> >> Good point - as I am guessing there will be debate about the 'amount' >> of info displayed and am open to suggestions on how to word it and/or >> how to enable it. In future revs of the patchset I'll be more explicit >> in the commit logs, but for now with the series applied I get this: >> >> IMX6Q automotive (1GHz capable) powering up at 800MHz: >> - before: >> CPU: Freescale i.MX6Q rev1.2 at 792 MHz >> - after Patch 1/4: >> CPU: Freescale i.MX6Q rev1.2 996 MHz (at 792 MHz) >> - after Patch 3/4 (if CONFIG_IMX6_THERMAL defined) >> CPU: Freescale i.MX6Q rev1.2 automotive (-40C to 125C) 996 MHz (at 792 MHz) >> >> IMX6S industrial (800MHz capable) powering up at 800MHz: >> - before: >> CPU: Freescale i.MX6SOLO rev1.2 at 792 MHz >> - after Patch 1/4: (max speed == cur speed) >> CPU: Freescale i.MX6SOLO rev1.2 792 MHz >> - after Patch 3/4 (if CONFIG_IMX6_THERMAL defined) >> CPU: Freescale i.MX6SOLO rev1.2 industrial (-40C to 105C) 792 MHz >> >> When I submit the next version I will split out adding the functions >> to get speed-grade and temperature-grade from using those functions in >> cpu_printinfo() as well as some may not be happy with adding more info >> to cpu_printinfo() but may find value in setting the thermal limits of >> imx_thermal properly based on temp-grade (Patch 4/4). >> >> Tim > > Stefano, > > I've cc'd all the maintainers I could find of MX6 based boards for > comment on adding this text to the mx6 print_cpuinfo. I would like to > see some ack/review from them otherwise I would think silence is > considered a thumbs up ;) >
Acked-by: Christian Gmeiner <christian.gmei...@gmail.com> greets -- Christian Gmeiner, MSc https://soundcloud.com/christian-gmeiner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot