On 07.05.2015 17:55, Tim Harvey wrote:
On Tue, Apr 28, 2015 at 10:31 AM, Tim Harvey <thar...@gateworks.com> wrote:
On Tue, Apr 28, 2015 at 10:11 AM, Stefan Roese <s...@denx.de> wrote:
Hi Tim,
On 28.04.2015 17:44, Tim Harvey wrote:
The MX6 has OTP bits specifying the processor speed grade as well as
temperature grade.
This series adds functions to return this information as well as adds the
details to the CPU info displayed.
Additionally we use the temperature grade to replace the hard-coded limits
in imx_thermal.c
I expect some possible discussion/debate regarding the displaying of this
info,
but perhaps adding the functions to obtain the info and use it for
imx_thermal
is beyond debate. Please let me know.
Could you please send (or include in the commit text) an example, how these
infos are displayed now in the bootup log? Best in comparison to the "old"
log. To see the output change resulting from the patchset.
Thanks,
Stefan
Stefan,
Good point - as I am guessing there will be debate about the 'amount'
of info displayed and am open to suggestions on how to word it and/or
how to enable it. In future revs of the patchset I'll be more explicit
in the commit logs, but for now with the series applied I get this:
IMX6Q automotive (1GHz capable) powering up at 800MHz:
- before:
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
- after Patch 1/4:
CPU: Freescale i.MX6Q rev1.2 996 MHz (at 792 MHz)
- after Patch 3/4 (if CONFIG_IMX6_THERMAL defined)
CPU: Freescale i.MX6Q rev1.2 automotive (-40C to 125C) 996 MHz (at 792 MHz)
IMX6S industrial (800MHz capable) powering up at 800MHz:
- before:
CPU: Freescale i.MX6SOLO rev1.2 at 792 MHz
- after Patch 1/4: (max speed == cur speed)
CPU: Freescale i.MX6SOLO rev1.2 792 MHz
- after Patch 3/4 (if CONFIG_IMX6_THERMAL defined)
CPU: Freescale i.MX6SOLO rev1.2 industrial (-40C to 105C) 792 MHz
When I submit the next version I will split out adding the functions
to get speed-grade and temperature-grade from using those functions in
cpu_printinfo() as well as some may not be happy with adding more info
to cpu_printinfo() but may find value in setting the thermal limits of
imx_thermal properly based on temp-grade (Patch 4/4).
Tim
Stefano,
I've cc'd all the maintainers I could find of MX6 based boards for
comment on adding this text to the mx6 print_cpuinfo. I would like to
see some ack/review from them otherwise I would think silence is
considered a thumbs up ;)
Yep. ;)
Acked-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot