On Tue, Apr 28, 2015 at 10:31 AM, Tim Harvey <thar...@gateworks.com> wrote: > On Tue, Apr 28, 2015 at 10:11 AM, Stefan Roese <s...@denx.de> wrote: >> Hi Tim, >> >> On 28.04.2015 17:44, Tim Harvey wrote: >>> >>> The MX6 has OTP bits specifying the processor speed grade as well as >>> temperature grade. >>> >>> This series adds functions to return this information as well as adds the >>> details to the CPU info displayed. >>> >>> Additionally we use the temperature grade to replace the hard-coded limits >>> in imx_thermal.c >>> >>> I expect some possible discussion/debate regarding the displaying of this >>> info, >>> but perhaps adding the functions to obtain the info and use it for >>> imx_thermal >>> is beyond debate. Please let me know. >> >> >> Could you please send (or include in the commit text) an example, how these >> infos are displayed now in the bootup log? Best in comparison to the "old" >> log. To see the output change resulting from the patchset. >> >> Thanks, >> Stefan >> > > Stefan, > > Good point - as I am guessing there will be debate about the 'amount' > of info displayed and am open to suggestions on how to word it and/or > how to enable it. In future revs of the patchset I'll be more explicit > in the commit logs, but for now with the series applied I get this: > > IMX6Q automotive (1GHz capable) powering up at 800MHz: > - before: > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > - after Patch 1/4: > CPU: Freescale i.MX6Q rev1.2 996 MHz (at 792 MHz) > - after Patch 3/4 (if CONFIG_IMX6_THERMAL defined) > CPU: Freescale i.MX6Q rev1.2 automotive (-40C to 125C) 996 MHz (at 792 MHz) > > IMX6S industrial (800MHz capable) powering up at 800MHz: > - before: > CPU: Freescale i.MX6SOLO rev1.2 at 792 MHz > - after Patch 1/4: (max speed == cur speed) > CPU: Freescale i.MX6SOLO rev1.2 792 MHz > - after Patch 3/4 (if CONFIG_IMX6_THERMAL defined) > CPU: Freescale i.MX6SOLO rev1.2 industrial (-40C to 105C) 792 MHz > > When I submit the next version I will split out adding the functions > to get speed-grade and temperature-grade from using those functions in > cpu_printinfo() as well as some may not be happy with adding more info > to cpu_printinfo() but may find value in setting the thermal limits of > imx_thermal properly based on temp-grade (Patch 4/4). > > Tim
Stefano, I've cc'd all the maintainers I could find of MX6 based boards for comment on adding this text to the mx6 print_cpuinfo. I would like to see some ack/review from them otherwise I would think silence is considered a thumbs up ;) Regards, Tim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot