On Wed, Apr 15, 2015 at 04:24:26PM +0530, Sanchayan Maity wrote: > This adds initial support for Colibri VF50/VF61 based on Freescale > Vybrid SoC. > > - CPU clocked at 396/500 MHz > - DDR3 at 396MHz > - for VF50, use PLL2 as memory clock (synchronous mode) > - for VF61, use PLL1 as memory clock (asynchronous mode) > - Console on UART0 (Colibri UART_A) > - Ethernet on FEC1 > - PLL5 based RMII clocking (E.g. No external crystal) > - UART_A and UART_C I/O muxing > - Boot from NAND by default > > Tested on Colibri VF50/VF61 booting using serial loader over UART. > > Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com> > Acked-by: Stefan Agner <ste...@agner.ch>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
