On 2015-04-15 12:54, Sanchayan Maity wrote:
> This adds initial support for Colibri VF50/VF61 based on Freescale
> Vybrid SoC.
> 
> - CPU clocked at 396/500 MHz
> - DDR3 at 396MHz
>   - for VF50, use PLL2 as memory clock (synchronous mode)
>   - for VF61, use PLL1 as memory clock (asynchronous mode)
> - Console on UART0 (Colibri UART_A)
> - Ethernet on FEC1
> - PLL5 based RMII clocking (E.g. No external crystal)
> - UART_A and UART_C I/O muxing
> - Boot from NAND by default
> 
> Tested on Colibri VF50/VF61 booting using serial loader over UART.
> 
> Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>

Acked-by: Stefan Agner <ste...@agner.ch>

Thanks for the patchset, Sanchayan!

--
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to