Hi Przemyslaw,
On 20 April 2015 at 12:07, Przemyslaw Marczak <p.marc...@samsung.com> wrote:
> This commit change the old pmic framework calls to the new ones.
>
> Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
> ---
> Changes v2:
> - remove board_init_i2c() call
> - update regulator calls
> - update headers
> - samsung/misc.c: include required header
>
> Changes v3:
> - adjust regulator calls to new api
>
> Changes V4:
> - use regulator_list_autoset() for mmc regulators
>
> ---
> board/samsung/common/misc.c | 1 +
> board/samsung/odroid/odroid.c | 77
> +++++++++++++++++++++++++------------------
> 2 files changed, 46 insertions(+), 32 deletions(-)
Acked-by: Simon Glass <s...@chromium.org>
>
> diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
> index 1a77c82..f0d69d4 100644
> --- a/board/samsung/common/misc.c
> +++ b/board/samsung/common/misc.c
> @@ -16,6 +16,7 @@
> #include <asm/arch/cpu.h>
> #include <asm/gpio.h>
> #include <linux/input.h>
> +#include <dm.h>
> #include <power/pmic.h>
> #include <mmc.h>
>
> diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
> index ae41c29..29de325 100644
> --- a/board/samsung/odroid/odroid.c
> +++ b/board/samsung/odroid/odroid.c
> @@ -12,7 +12,9 @@
> #include <asm/arch/gpio.h>
> #include <asm/gpio.h>
> #include <asm/arch/cpu.h>
> +#include <dm.h>
> #include <power/pmic.h>
> +#include <power/regulator.h>
> #include <power/max77686_pmic.h>
> #include <errno.h>
> #include <mmc.h>
> @@ -31,6 +33,12 @@ enum {
> ODROID_TYPES,
> };
>
> +static const char *mmc_regulators[] = {
> + "VDDQ_EMMC_1.8V",
> + "VDDQ_EMMC_2.8V",
> + "TFLASH_2.8V",
I wonder if it would be better to terminate with NULL instead of
requiring an ARRAY_SIZE?
> +};
> +
> void set_board_type(void)
> {
> /* Set GPA1 pin 1 to HI - enable XCL205 output */
> @@ -403,21 +411,6 @@ static void board_gpio_init(void)
> #endif
> }
>
> -static int pmic_init_max77686(void)
> -{
> - struct pmic *p = pmic_get("MAX77686_PMIC");
> -
> - if (pmic_probe(p))
> - return -ENODEV;
> -
> - /* Set LDO Voltage */
> - max77686_set_ldo_voltage(p, 20, 1800000); /* LDO20 eMMC */
> - max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 SD */
> - max77686_set_ldo_voltage(p, 22, 2800000); /* LDO22 eMMC */
> -
> - return 0;
> -}
> -
> int exynos_early_init_f(void)
> {
> board_clock_init();
> @@ -434,8 +427,10 @@ int exynos_init(void)
>
> int exynos_power_init(void)
> {
> - pmic_init(0);
> - pmic_init_max77686();
> + int list_count = ARRAY_SIZE(mmc_regulators);
> +
> + if (regulator_list_autoset(mmc_regulators, list_count, NULL, true))
> + error("Unable to init all mmc regulators");
>
> return 0;
> }
> @@ -443,19 +438,20 @@ int exynos_power_init(void)
> #ifdef CONFIG_USB_GADGET
> static int s5pc210_phy_control(int on)
> {
> - struct pmic *p_pmic;
> + struct udevice *dev;
> + int ret;
>
> - p_pmic = pmic_get("MAX77686_PMIC");
> - if (!p_pmic)
> - return -ENODEV;
> -
> - if (pmic_probe(p_pmic))
> - return -1;
> + ret = regulator_by_platname("VDD_UOTG_3.0V", &dev);
> + if (ret) {
> + error("Regulator get error: %d", ret);
> + return ret;
> + }
>
> if (on)
> - return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
> + return regulator_set_mode(dev, OPMODE_ON);
> else
> - return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
> + return regulator_set_mode(dev, OPMODE_LPM);
> +
> }
>
> struct s3c_plat_otg_data s5pc210_otg_data = {
> @@ -472,7 +468,8 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
> int board_usb_init(int index, enum usb_init_type init)
> {
> #ifdef CONFIG_CMD_USB
> - struct pmic *p_pmic;
> + struct udevice *dev;
> + int ret;
>
> /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
> /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
> @@ -490,14 +487,30 @@ int board_usb_init(int index, enum usb_init_type init)
> /* Power off and on BUCK8 for LAN9730 */
> debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
>
> - p_pmic = pmic_get("MAX77686_PMIC");
> - if (p_pmic && !pmic_probe(p_pmic)) {
> - max77686_set_buck_voltage(p_pmic, 8, 750000);
> - max77686_set_buck_voltage(p_pmic, 8, 3300000);
> + ret = regulator_by_platname("VCC_P3V3_2.85V", &dev);
> + if (ret) {
> + error("Regulator get error: %d", ret);
> + return ret;
> }
>
> -#endif
> + ret = regulator_set_enable(dev, true);
> + if (ret) {
> + error("Regulator %s enable setting error: %d", dev->name,
> ret);
> + return ret;
> + }
>
> + ret = regulator_set_value(dev, 750000);
> + if (ret) {
> + error("Regulator %s value setting error: %d", dev->name, ret);
> + return ret;
> + }
> +
> + ret = regulator_set_value(dev, 3300000);
> + if (ret) {
> + error("Regulator %s value setting error: %d", dev->name, ret);
> + return ret;
> + }
> +#endif
> debug("USB_udc_probe\n");
> return s3c_udc_probe(&s5pc210_otg_data);
> }
> --
> 1.9.1
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
