This commit change the old pmic framework calls to the new ones.

Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
Changes v2:
- remove board_init_i2c() call
- update regulator calls
- update headers
- samsung/misc.c: include required header

Changes v3:
- adjust regulator calls to new api

Changes V4:
- use regulator_list_autoset() for mmc regulators

---
 board/samsung/common/misc.c   |  1 +
 board/samsung/odroid/odroid.c | 77 +++++++++++++++++++++++++------------------
 2 files changed, 46 insertions(+), 32 deletions(-)

diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 1a77c82..f0d69d4 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -16,6 +16,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/gpio.h>
 #include <linux/input.h>
+#include <dm.h>
 #include <power/pmic.h>
 #include <mmc.h>
 
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index ae41c29..29de325 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -12,7 +12,9 @@
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
 #include <asm/arch/cpu.h>
+#include <dm.h>
 #include <power/pmic.h>
+#include <power/regulator.h>
 #include <power/max77686_pmic.h>
 #include <errno.h>
 #include <mmc.h>
@@ -31,6 +33,12 @@ enum {
        ODROID_TYPES,
 };
 
+static const char *mmc_regulators[] = {
+       "VDDQ_EMMC_1.8V",
+       "VDDQ_EMMC_2.8V",
+       "TFLASH_2.8V",
+};
+
 void set_board_type(void)
 {
        /* Set GPA1 pin 1 to HI - enable XCL205 output */
@@ -403,21 +411,6 @@ static void board_gpio_init(void)
 #endif
 }
 
-static int pmic_init_max77686(void)
-{
-       struct pmic *p = pmic_get("MAX77686_PMIC");
-
-       if (pmic_probe(p))
-               return -ENODEV;
-
-       /* Set LDO Voltage */
-       max77686_set_ldo_voltage(p, 20, 1800000);       /* LDO20 eMMC */
-       max77686_set_ldo_voltage(p, 21, 2800000);       /* LDO21 SD */
-       max77686_set_ldo_voltage(p, 22, 2800000);       /* LDO22 eMMC */
-
-       return 0;
-}
-
 int exynos_early_init_f(void)
 {
        board_clock_init();
@@ -434,8 +427,10 @@ int exynos_init(void)
 
 int exynos_power_init(void)
 {
-       pmic_init(0);
-       pmic_init_max77686();
+       int list_count = ARRAY_SIZE(mmc_regulators);
+
+       if (regulator_list_autoset(mmc_regulators, list_count, NULL, true))
+               error("Unable to init all mmc regulators");
 
        return 0;
 }
@@ -443,19 +438,20 @@ int exynos_power_init(void)
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
-       struct pmic *p_pmic;
+       struct udevice *dev;
+       int ret;
 
-       p_pmic = pmic_get("MAX77686_PMIC");
-       if (!p_pmic)
-               return -ENODEV;
-
-       if (pmic_probe(p_pmic))
-               return -1;
+       ret = regulator_by_platname("VDD_UOTG_3.0V", &dev);
+       if (ret) {
+               error("Regulator get error: %d", ret);
+               return ret;
+       }
 
        if (on)
-               return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+               return regulator_set_mode(dev, OPMODE_ON);
        else
-               return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+               return regulator_set_mode(dev, OPMODE_LPM);
+
 }
 
 struct s3c_plat_otg_data s5pc210_otg_data = {
@@ -472,7 +468,8 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
 int board_usb_init(int index, enum usb_init_type init)
 {
 #ifdef CONFIG_CMD_USB
-       struct pmic *p_pmic;
+       struct udevice *dev;
+       int ret;
 
        /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
        /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
@@ -490,14 +487,30 @@ int board_usb_init(int index, enum usb_init_type init)
        /* Power off and on BUCK8 for LAN9730 */
        debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
 
-       p_pmic = pmic_get("MAX77686_PMIC");
-       if (p_pmic && !pmic_probe(p_pmic)) {
-               max77686_set_buck_voltage(p_pmic, 8, 750000);
-               max77686_set_buck_voltage(p_pmic, 8, 3300000);
+       ret = regulator_by_platname("VCC_P3V3_2.85V", &dev);
+       if (ret) {
+               error("Regulator get error: %d", ret);
+               return ret;
        }
 
-#endif
+       ret = regulator_set_enable(dev, true);
+       if (ret) {
+               error("Regulator %s enable setting error: %d", dev->name, ret);
+               return ret;
+       }
 
+       ret = regulator_set_value(dev, 750000);
+       if (ret) {
+               error("Regulator %s value setting error: %d", dev->name, ret);
+               return ret;
+       }
+
+       ret = regulator_set_value(dev, 3300000);
+       if (ret) {
+               error("Regulator %s value setting error: %d", dev->name, ret);
+               return ret;
+       }
+#endif
        debug("USB_udc_probe\n");
        return s3c_udc_probe(&s5pc210_otg_data);
 }
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to