On 03/27/2015 12:48 AM, Shengzhou Liu wrote: > T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC. > > T1023RDB board Overview > ----------------------- > - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz > - CoreNet fabric supporting coherent and noncoherent transactions with > prioritization and bandwidth allocation > - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC > - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC > - Ethernet interfaces: > - one 1G RGMII port on-board(RTL8211F PHY) > - one 1G SGMII port on-board(RTL8211F PHY) > - one 2.5G SGMII port on-board(AQR105 PHY) > - PCIe: Two Mini-PCIe connectors on-board. > - SerDes: 4 lanes up to 10.3125GHz > - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash > - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash > - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash. > - USB: one Type-A USB 2.0 port with internal PHY > - eSDHC: support SD/MMC card and eMMC on-board > - 256Kbit M24256 I2C EEPROM > - RTC: Real-time clock DS1339 on I2C bus > - UART: one serial port on-board with RJ45 connector > - Debugging: JTAG/COP for T1023 debugging > > As well updated T1024RDB to add T1023RDB. > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > --- > v4: squashed ddr patch to this one. > v3: updated readme. > v2: updated the printout of serdes refclk. >
<snip> > diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig > new file mode 100644 > index 0000000..23c2f03 > --- /dev/null > +++ b/configs/T1023RDB_NAND_defconfig > @@ -0,0 +1,5 @@ > +CONFIG_SPL=y > +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1023,T1023RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND" > ++S:CONFIG_PPC=y > ++S:CONFIG_MPC85xx=y > ++S:CONFIG_TARGET_T102XRDB=y Please do not use CONFIG_SYS_EXTRA_OPTIONS for new boards. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
