Tom/Stefano, On Tue, Apr 7, 2015 at 12:46 AM, hui....@freescale.com <hui....@freescale.com> wrote: >> -----Original Message----- >> From: Fabio Estevam [mailto:fabio.este...@freescale.com] >> Sent: Monday, April 06, 2015 10:23 PM >> To: sba...@denx.de >> Cc: Liu Hui-R64343; u-boot@lists.denx.de; Estevam Fabio-R49496 >> Subject: [PATCH] mx53loco: Disable printing cpuinfo >> >> Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the >> following boot messages on a mx53qsb: >> >> U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39) >> >> CPU: Freescale i.MX53 rev2.1 at 800 MHz >> Reset cause: POR >> Board: MX53 LOCO >> I2C: ready >> DRAM: 1 GiB >> MMC: FSL_SDHC: 0, FSL_SDHC: 1 >> In: serial >> Out: serial >> Err: serial >> CPU: Freescale i.MX53 rev2.1 at 1000 MHz >> Reset cause: unknown reset >> Net: FEC [PRIME] >> >> The CPU and Reset cause lines appear twice. >> >> Initially mx53 boots at 800MHz, then at a later point the PMIC is >> configured via I2C to raise the CPU voltage so that it can run at 1GHz. >> >> To avoid such misleading double printings, disable printing cpu info for >> now. >> >> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > > Acked-by: Jason Liu <r64...@freescale.com>
Can we have this one applied for 2015.04? It fixes some bogus boot logs. Thanks, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
