> -----Original Message----- > From: Fabio Estevam [mailto:fabio.este...@freescale.com] > Sent: Monday, April 06, 2015 10:23 PM > To: sba...@denx.de > Cc: Liu Hui-R64343; u-boot@lists.denx.de; Estevam Fabio-R49496 > Subject: [PATCH] mx53loco: Disable printing cpuinfo > > Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the > following boot messages on a mx53qsb: > > U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39) > > CPU: Freescale i.MX53 rev2.1 at 800 MHz > Reset cause: POR > Board: MX53 LOCO > I2C: ready > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > In: serial > Out: serial > Err: serial > CPU: Freescale i.MX53 rev2.1 at 1000 MHz > Reset cause: unknown reset > Net: FEC [PRIME] > > The CPU and Reset cause lines appear twice. > > Initially mx53 boots at 800MHz, then at a later point the PMIC is > configured via I2C to raise the CPU voltage so that it can run at 1GHz. > > To avoid such misleading double printings, disable printing cpu info for > now. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Acked-by: Jason Liu <r64...@freescale.com> > --- > board/freescale/mx53loco/mx53loco.c | 1 - > include/configs/mx53loco.h | 2 -- > 2 files changed, 3 deletions(-) > > diff --git a/board/freescale/mx53loco/mx53loco.c > b/board/freescale/mx53loco/mx53loco.c > index 9ece6ec..1298788 100644 > --- a/board/freescale/mx53loco/mx53loco.c > +++ b/board/freescale/mx53loco/mx53loco.c > @@ -389,7 +389,6 @@ int board_late_init(void) { > if (!power_init()) > clock_1GHz(); > - print_cpuinfo(); > > return 0; > } > diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h > index 8f92234..3551e02 100644 > --- a/include/configs/mx53loco.h > +++ b/include/configs/mx53loco.h > @@ -24,8 +24,6 @@ > > #define CONFIG_SYS_GENERIC_BOARD > > -#define CONFIG_DISPLAY_CPUINFO > - > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) > > -- > 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot