Dear Bo Shen, Bo Shen <voice.s...@atmel.com> writes: >Enable SPL support for at91sam9n12ek boards, now it supports >boot up from NAND flash, serial flash. > >Signed-off-by: Bo Shen <voice.s...@atmel.com> >--- > >Changes in v2: > - Remove the meaningless prefix "+S:" in configuration file. > > arch/arm/mach-at91/Kconfig | 1 + > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/include/mach/at91_pmc.h | 4 +- > arch/arm/mach-at91/mpddrc.c | 2 +- > arch/arm/mach-at91/spl_at91.c | 2 +- > board/atmel/at91sam9n12ek/at91sam9n12ek.c | 73 ++++++++++++++++++++++++++++++ > configs/at91sam9n12ek_nandflash_defconfig | 1 + > configs/at91sam9n12ek_spiflash_defconfig | 1 + > include/configs/at91sam9n12ek.h | 58 +++++++++++++++++++++++- > 9 files changed, 138 insertions(+), 5 deletions(-)
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
