Dear Bo Shen, Bo Shen <voice.s...@atmel.com> writes: >Enable SPL support for at91sam9x5ek board. Now, it supports >boot up from NAND flash and SPI flash. > >Signed-off-by: Bo Shen <voice.s...@atmel.com> >--- > >Changes in v2: > - Remove the meaningless prefix "+S:" in configuration file. > > arch/arm/mach-at91/Kconfig | 1 + > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/include/mach/at91_pmc.h | 6 ++- > arch/arm/mach-at91/include/mach/at91sam9x5.h | 10 ++++ > arch/arm/mach-at91/mpddrc.c | 3 +- > arch/arm/mach-at91/spl.c | 2 +- > arch/arm/mach-at91/spl_at91.c | 5 ++ > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 74 ++++++++++++++++++++++++++++ > configs/at91sam9x5ek_nandflash_defconfig | 1 + > configs/at91sam9x5ek_spiflash_defconfig | 1 + > include/configs/at91sam9x5ek.h | 57 +++++++++++++++++++++ > 11 files changed, 157 insertions(+), 4 deletions(-)
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
