Hi Stephen, On 16 February 2015 at 21:09, Stephen Warren <swar...@wwwdotorg.org> wrote: > > On 02/16/2015 06:03 PM, Tom Rini wrote: > > On Mon, Feb 16, 2015 at 12:16:15PM -0700, Stephen Warren wrote: > > > >> USB doesn't seem to work yet; the controller detects the on-board > >> Hub/ Ethernet device but can't read the descriptors from it. I > >> haven't investigated yet. > >> > >> Signed-off-by: Stephen Warren <swar...@wwwdotorg.org> --- v3: > >> Rebased on top of u-boot-dm merge. v2: Implement new board_rev > >> decoding scheme, to avoid hard-coding the board revision onthe > >> RPi 2. > > > > +(rpi_2) make[3]: *** No rule to make target > > `arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed > > by `arch/arm/cpu/armv7/bcm2835/built-in.o'. Stop. +(rpi_2) > > make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +(rpi_2) make[1]: > > *** [arch/arm/cpu/armv7] Error 2 > > > > When I try and build it with buildman. Something get left out > > somewhere? Thanks! > > It works fine for me using make: > > export CROSS_COMPILE=arm-linux-gnueabi- > make ARCH=arm rpi_2_defconfig && make ARCH=arm -j8 -s > > git status doesn't think I forgot to check anything in. The build > works after git clean -f -d -x. > > I can't remember how to run buildman, and the help text doesn't really > clue me in. I guess I'll go wade through the README. >
Well worth it :-) Something like this might work for you: buildman --fetch-arch arm buildman rpi_2 or if you want to build the whole branch: buildman -b <local_branch> rpi_2 Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
