Hi Kishon,
> Removed most of the trace_* APIs from dwc3 driver since tracepoints
> are not supported in u-boot. Replaced some of the trace_* API with
> dev_dbg/dev/vdbg.
>
> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
> ---
> drivers/usb/dwc3/Makefile | 5 +---
> drivers/usb/dwc3/ep0.c | 70
> ++++++++++++++++++---------------------------
> drivers/usb/dwc3/gadget.c | 17 -----------
> drivers/usb/dwc3/io.h | 17 ----------- 4 files changed, 29
> insertions(+), 80 deletions(-)
>
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index bb34fbc..afaa767 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -1,12 +1,9 @@
> -# define_trace.h needs to know how to find our header
> -CFLAGS_trace.o := -I$(src)
> -
> ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG
> ccflags-$(CONFIG_USB_DWC3_VERBOSE) += -DVERBOSE_DEBUG
>
> obj-$(CONFIG_USB_DWC3) += dwc3.o
>
> -dwc3-y := core.o debug.o
> trace.o +dwc3-y := core.o
> debug.o
> ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST)
> $(CONFIG_USB_DWC3_DUAL_ROLE)),) dwc3-y
> += host.o diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> index c9fcb77..1751b1d 100644
> --- a/drivers/usb/dwc3/ep0.c
> +++ b/drivers/usb/dwc3/ep0.c
> @@ -64,7 +64,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc,
> u8 epnum, dma_addr_t buf_dma,
> dep = dwc->eps[epnum];
> if (dep->flags & DWC3_EP_BUSY) {
> - dwc3_trace(trace_dwc3_ep0, "%s still busy",
> dep->name);
> + dev_vdbg(dwc->dev, "%s still busy", dep->name);
> return 0;
> }
>
> @@ -84,13 +84,10 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc,
> u8 epnum, dma_addr_t buf_dma, params.param0 =
> upper_32_bits(dwc->ep0_trb_addr); params.param1 =
> lower_32_bits(dwc->ep0_trb_addr);
> - trace_dwc3_prepare_trb(dep, trb);
> -
> ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
> DWC3_DEPCMD_STARTTRANSFER, ¶ms);
> if (ret < 0) {
> - dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
> - dep->name);
> + dev_dbg(dwc->dev, "%s STARTTRANSFER failed",
> dep->name); return ret;
> }
>
> @@ -155,8 +152,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep
> *dep, if (dwc->ep0state == EP0_STATUS_PHASE)
> __dwc3_ep0_do_control_status(dwc,
> dwc->eps[direction]); else
> - dwc3_trace(trace_dwc3_ep0,
> - "too early for delayed
> status");
> + dev_dbg(dwc->dev, "too early for delayed
> status");
> return 0;
> }
> @@ -220,8 +216,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep,
> struct usb_request *request,
> spin_lock_irqsave(&dwc->lock, flags);
> if (!dep->endpoint.desc) {
> - dwc3_trace(trace_dwc3_ep0,
> - "trying to queue request %p to
> disabled %s",
> + dev_dbg(dwc->dev, "trying to queue request %p to
> disabled %s", request, dep->name);
> ret = -ESHUTDOWN;
> goto out;
> @@ -233,8 +228,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep,
> struct usb_request *request, goto out;
> }
>
> - dwc3_trace(trace_dwc3_ep0,
> - "queueing request %p to %s length %d state
> '%s'",
> + dev_vdbg(dwc->dev, "queueing request %p to %s length %d
> state '%s'", request, dep->name, request->length,
> dwc3_ep0_state_string(dwc->ep0state));
>
> @@ -503,13 +497,12 @@ static int dwc3_ep0_set_address(struct dwc3
> *dwc, struct usb_ctrlrequest *ctrl)
> addr = le16_to_cpu(ctrl->wValue);
> if (addr > 127) {
> - dwc3_trace(trace_dwc3_ep0, "invalid device address
> %d", addr);
> + dev_dbg(dwc->dev, "invalid device address %d", addr);
> return -EINVAL;
> }
>
> if (state == USB_STATE_CONFIGURED) {
> - dwc3_trace(trace_dwc3_ep0,
> - "trying to set address when
> configured");
> + dev_dbg(dwc->dev, "trying to set address when
> configured"); return -EINVAL;
> }
>
> @@ -574,7 +567,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc,
> struct usb_ctrlrequest *ctrl) dwc3_writel(dwc->regs, DWC3_DCTL, reg);
>
> dwc->resize_fifos = true;
> - dwc3_trace(trace_dwc3_ep0, "resize FIFOs
> flag SET");
> + dev_dbg(dwc->dev, "resize FIFOs flag SET");
> }
> break;
>
> @@ -698,35 +691,35 @@ static int dwc3_ep0_std_request(struct dwc3
> *dwc, struct usb_ctrlrequest *ctrl)
> switch (ctrl->bRequest) {
> case USB_REQ_GET_STATUS:
> - dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS");
> + dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS");
> ret = dwc3_ep0_handle_status(dwc, ctrl);
> break;
> case USB_REQ_CLEAR_FEATURE:
> - dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE");
> + dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE");
> ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
> break;
> case USB_REQ_SET_FEATURE:
> - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE");
> + dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE");
> ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
> break;
> case USB_REQ_SET_ADDRESS:
> - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS");
> + dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS");
> ret = dwc3_ep0_set_address(dwc, ctrl);
> break;
> case USB_REQ_SET_CONFIGURATION:
> - dwc3_trace(trace_dwc3_ep0,
> "USB_REQ_SET_CONFIGURATION");
> + dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION");
> ret = dwc3_ep0_set_config(dwc, ctrl);
> break;
> case USB_REQ_SET_SEL:
> - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL");
> + dev_vdbg(dwc->dev, "USB_REQ_SET_SEL");
> ret = dwc3_ep0_set_sel(dwc, ctrl);
> break;
> case USB_REQ_SET_ISOCH_DELAY:
> - dwc3_trace(trace_dwc3_ep0,
> "USB_REQ_SET_ISOCH_DELAY");
> + dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY");
> ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
> break;
> default:
> - dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget
> driver");
> + dev_vdbg(dwc->dev, "Forwarding to gadget driver");
> ret = dwc3_ep0_delegate_req(dwc, ctrl);
> break;
> }
> @@ -744,8 +737,6 @@ static void dwc3_ep0_inspect_setup(struct dwc3
> *dwc, if (!dwc->gadget_driver)
> goto out;
>
> - trace_dwc3_ctrl_req(ctrl);
> -
> len = le16_to_cpu(ctrl->wLength);
> if (!len) {
> dwc->three_stage_setup = false;
> @@ -789,15 +780,13 @@ static void dwc3_ep0_complete_data(struct dwc3
> *dwc,
> trb = dwc->ep0_trb;
>
> - trace_dwc3_complete_trb(ep0, trb);
> -
> r = next_request(&ep0->request_list);
> if (!r)
> return;
>
> status = DWC3_TRB_SIZE_TRBSTS(trb->size);
> if (status == DWC3_TRBSTS_SETUP_PENDING) {
> - dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
> + dev_dbg(dwc->dev, "Setup Pending received");
>
> if (r)
> dwc3_gadget_giveback(ep0, r, -ECONNRESET);
> @@ -855,8 +844,6 @@ static void dwc3_ep0_complete_status(struct dwc3
> *dwc, dep = dwc->eps[0];
> trb = dwc->ep0_trb;
>
> - trace_dwc3_complete_trb(dep, trb);
> -
> if (!list_empty(&dep->request_list)) {
> r = next_request(&dep->request_list);
>
> @@ -868,7 +855,7 @@ static void dwc3_ep0_complete_status(struct dwc3
> *dwc,
> ret = dwc3_gadget_set_test_mode(dwc,
> dwc->test_mode_nr); if (ret < 0) {
> - dwc3_trace(trace_dwc3_ep0, "Invalid Test
> #%d",
> + dev_dbg(dwc->dev, "Invalid Test #%d",
> dwc->test_mode_nr);
> dwc3_ep0_stall_and_restart(dwc);
> return;
> @@ -877,7 +864,7 @@ static void dwc3_ep0_complete_status(struct dwc3
> *dwc,
> status = DWC3_TRB_SIZE_TRBSTS(trb->size);
> if (status == DWC3_TRBSTS_SETUP_PENDING)
> - dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
> + dev_dbg(dwc->dev, "Setup Pending received");
>
> dwc->ep0state = EP0_SETUP_PHASE;
> dwc3_ep0_out_start(dwc);
> @@ -894,17 +881,17 @@ static void dwc3_ep0_xfer_complete(struct dwc3
> *dwc,
> switch (dwc->ep0state) {
> case EP0_SETUP_PHASE:
> - dwc3_trace(trace_dwc3_ep0, "Setup Phase");
> + dev_vdbg(dwc->dev, "Setup Phase");
> dwc3_ep0_inspect_setup(dwc, event);
> break;
>
> case EP0_DATA_PHASE:
> - dwc3_trace(trace_dwc3_ep0, "Data Phase");
> + dev_vdbg(dwc->dev, "Data Phase");
> dwc3_ep0_complete_data(dwc, event);
> break;
>
> case EP0_STATUS_PHASE:
> - dwc3_trace(trace_dwc3_ep0, "Status Phase");
> + dev_vdbg(dwc->dev, "Status Phase");
> dwc3_ep0_complete_status(dwc, event);
> break;
> default:
> @@ -980,7 +967,7 @@ static int dwc3_ep0_start_control_status(struct
> dwc3_ep *dep) static void __dwc3_ep0_do_control_status(struct dwc3
> *dwc, struct dwc3_ep *dep) {
> if (dwc->resize_fifos) {
> - dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
> + dev_dbg(dwc->dev, "Resizing FIFOs");
> dwc3_gadget_resize_tx_fifos(dwc);
> dwc->resize_fifos = 0;
> }
> @@ -1021,7 +1008,7 @@ static void dwc3_ep0_xfernotready(struct dwc3
> *dwc,
> switch (event->status) {
> case DEPEVT_STATUS_CONTROL_DATA:
> - dwc3_trace(trace_dwc3_ep0, "Control Data");
> + dev_vdbg(dwc->dev, "Control Data");
>
> /*
> * We already have a DATA transfer in the
> controller's cache, @@ -1035,8 +1022,7 @@ static void
> dwc3_ep0_xfernotready(struct dwc3 *dwc, if (dwc->ep0_expect_in !=
> event->endpoint_number) { struct dwc3_ep *dep =
> dwc->eps[dwc->ep0_expect_in];
> - dwc3_trace(trace_dwc3_ep0,
> - "Wrong direction for Data
> phase");
> + dev_vdbg(dwc->dev, "Wrong direction for Data
> phase"); dwc3_ep0_end_control_data(dwc, dep);
> dwc3_ep0_stall_and_restart(dwc);
> return;
> @@ -1048,13 +1034,13 @@ static void dwc3_ep0_xfernotready(struct dwc3
> *dwc, if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
> return;
>
> - dwc3_trace(trace_dwc3_ep0, "Control Status");
> + dev_vdbg(dwc->dev, "Control Status");
>
> dwc->ep0state = EP0_STATUS_PHASE;
>
> if (dwc->delayed_status) {
> WARN_ON_ONCE(event->endpoint_number != 1);
> - dwc3_trace(trace_dwc3_ep0, "Delayed Status");
> + dev_vdbg(dwc->dev, "Delayed Status");
> return;
> }
>
> @@ -1067,7 +1053,7 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc,
> {
> u8 epnum = event->endpoint_number;
>
> - dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
> + dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'",
> dwc3_ep_event_string(event->endpoint_event),
> epnum >> 1, (epnum & 1) ? "in" : "out",
> dwc3_ep0_state_string(dwc->ep0state));
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 0aefc5c..ca0f0cd 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -265,7 +265,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep,
> struct dwc3_request *req, dev_dbg(dwc->dev, "request %p from %s
> completed %d/%d ===> %d\n", req, dep->name, req->request.actual,
> req->request.length, status);
> - trace_dwc3_gadget_giveback(req);
>
> spin_unlock(&dwc->lock);
> usb_gadget_giveback_request(&dep->endpoint, &req->request);
> @@ -277,8 +276,6 @@ int dwc3_send_gadget_generic_command(struct dwc3
> *dwc, unsigned cmd, u32 param) u32 timeout = 500;
> u32 reg;
>
> - trace_dwc3_gadget_generic_cmd(cmd, param);
> -
> dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
> dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
>
> @@ -308,8 +305,6 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc,
> unsigned ep, u32 timeout = 500;
> u32 reg;
>
> - trace_dwc3_gadget_ep_cmd(dep, cmd, params);
> -
> dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
> dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
> dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
> @@ -704,8 +699,6 @@ static struct usb_request
> *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, req->epnum =
> dep->number; req->dep = dep;
>
> - trace_dwc3_alloc_request(req);
> -
> return &req->request;
> }
>
> @@ -714,7 +707,6 @@ static void dwc3_gadget_ep_free_request(struct
> usb_ep *ep, {
> struct dwc3_request *req =
> to_dwc3_request(request);
> - trace_dwc3_free_request(req);
> kfree(req);
> }
>
> @@ -796,8 +788,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep
> *dep, trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
>
> trb->ctrl |= DWC3_TRB_CTRL_HWO;
> -
> - trace_dwc3_prepare_trb(dep, trb);
> }
>
> /*
> @@ -1150,7 +1140,6 @@ static int dwc3_gadget_ep_queue(struct usb_ep
> *ep, struct usb_request *request,
> dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
> request, ep->name, request->length);
> - trace_dwc3_ep_queue(req);
>
> ret = __dwc3_gadget_ep_queue(dep, req);
>
> @@ -1172,8 +1161,6 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep
> *ep, unsigned long flags;
> int ret = 0;
>
> - trace_dwc3_ep_dequeue(req);
> -
> spin_lock_irqsave(&dwc->lock, flags);
>
> list_for_each_entry(r, &dep->request_list, list) {
> @@ -1771,8 +1758,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3
> *dwc, struct dwc3_ep *dep, unsigned int s_pkt = 0;
> unsigned int trb_status;
>
> - trace_dwc3_complete_trb(dep, trb);
> -
> if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
> /*
> * We continue despite the error. There is not much
> we @@ -2529,8 +2514,6 @@ static void dwc3_gadget_interrupt(struct
> dwc3 *dwc, static void dwc3_process_event_entry(struct dwc3 *dwc,
> const union dwc3_event *event)
> {
> - trace_dwc3_event(event->raw);
> -
> /* Endpoint IRQ, handle it and return early */
> if (event->type.is_devspec == 0) {
> /* depevt */
> diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
> index 87a1ae6..f9f22b0 100644
> --- a/drivers/usb/dwc3/io.h
> +++ b/drivers/usb/dwc3/io.h
> @@ -19,7 +19,6 @@
> #define __DRIVERS_USB_DWC3_IO_H
>
> #include <linux/io.h>
> -#include "trace.h"
> #include "debug.h"
> #include "core.h"
>
> @@ -35,14 +34,6 @@ static inline u32 dwc3_readl(void __iomem *base,
> u32 offset) */
> value = readl(base + offs);
>
> - /*
> - * When tracing we want to make it easy to find the correct
> address on
> - * documentation, so we revert it back to the proper
> addresses, the
> - * same way they are described on SNPS documentation
> - */
> - dwc3_trace(trace_dwc3_readl, "addr %p value %08x",
> - base - DWC3_GLOBALS_REGS_START + offset,
> value); -
> return value;
> }
>
> @@ -56,14 +47,6 @@ static inline void dwc3_writel(void __iomem *base,
> u32 offset, u32 value)
> * However, the offsets are given starting from xHCI address
> space. */
> writel(value, base + offs);
> -
> - /*
> - * When tracing we want to make it easy to find the correct
> address on
> - * documentation, so we revert it back to the proper
> addresses, the
> - * same way they are described on SNPS documentation
> - */
> - dwc3_trace(trace_dwc3_writel, "addr %p value %08x",
> - base - DWC3_GLOBALS_REGS_START + offset,
> value); }
>
> #endif /* __DRIVERS_USB_DWC3_IO_H */
Review-by: Lukasz Majewski <l.majew...@samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
