Added a structure to populate dwc3 omap platform data. The board file should
populate these platform data before invoking dwc3 omap driver.
This will be removed once dwc3-omap driver is adapted to use the driver model.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
drivers/usb/dwc3/dwc3-omap.c | 7 -------
include/dwc3-omap-uboot.h | 27 +++++++++++++++++++++++++++
2 files changed, 27 insertions(+), 7 deletions(-)
create mode 100644 include/dwc3-omap-uboot.h
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index b385987..31a2aa3 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -120,13 +120,6 @@ struct dwc3_omap {
u32 dma_status:1;
};
-enum omap_dwc3_vbus_id_status {
- OMAP_DWC3_ID_FLOAT,
- OMAP_DWC3_ID_GROUND,
- OMAP_DWC3_VBUS_OFF,
- OMAP_DWC3_VBUS_VALID,
-};
-
static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
{
return readl(base + offset);
diff --git a/include/dwc3-omap-uboot.h b/include/dwc3-omap-uboot.h
new file mode 100644
index 0000000..b313b64
--- /dev/null
+++ b/include/dwc3-omap-uboot.h
@@ -0,0 +1,27 @@
+/* include/dwc3_omap_uboot.h
+ *
+ * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Designware SuperSpeed OMAP Glue uboot init
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __DWC3_OMAP_UBOOT_H_
+#define __DWC3_OMAP_UBOOT_H_
+
+#include <linux/usb/dwc3-omap.h>
+
+enum omap_dwc3_vbus_id_status {
+ OMAP_DWC3_ID_FLOAT,
+ OMAP_DWC3_ID_GROUND,
+ OMAP_DWC3_VBUS_OFF,
+ OMAP_DWC3_VBUS_VALID,
+};
+
+struct dwc3_omap_device {
+ void *base;
+ enum dwc3_omap_utmi_mode utmi_mode;
+ enum omap_dwc3_vbus_id_status vbus_id_status;
+};
+#endif /* __DWC3_OMAP_UBOOT_H_ */
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
