On 11/20/2014 12:10 PM, Simon Glass wrote:
> Hi York,
>>
>> I think the key is to configure it, not build it. With the failure case, it
>> doesn't build. I am thinking to find the equivalent to "make ARCH=power ...".
>> How to dump that?
>
> Add a 'print' line to make() in builder.py:
>
> cmd = [self.gnu_make] + list(args)
> print cmd
> result = command.RunPipe([cmd], capture=True, capture_stderr=True,
> cwd=cwd, raise_on_error=False, **kwargs)
> return result
>
Thanks. Adding the "print cmd" makes the issue disappeared. Removing it, the
issue comes back. Add it back, it is gone again. I removed the working directory
each time before building it. See the commands below
$ !407
./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs
--force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
0 0 0 /1 (starting) ['make', 'mrproper', 'O=build', '-j', '24']
['make', 'O=build', '-j', '24', 'MPC832XEMDS_HOST_66_defconfig']
['make', 'O=build', '-j', '24']
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
1 0 0 /1 MPC832XEMDS_HOST_66
-bash-3.2$ git diff
diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py
index 8155c16..0411959 100644
--- a/tools/buildman/builder.py
+++ b/tools/buildman/builder.py
@@ -324,6 +324,7 @@ class Builder:
kwargs: Arguments to pass to command.RunPipe()
"""
cmd = [self.gnu_make] + list(args)
+ print cmd
result = command.RunPipe([cmd], capture=True, capture_stderr=True,
cwd=cwd, raise_on_error=False, **kwargs)
return result
diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py
index a9cf68a..d9526e6 100644
--- a/tools/buildman/builderthread.py
+++ b/tools/buildman/builderthread.py
@@ -197,7 +197,7 @@ class BuilderThread(threading.Thread):
src_dir = os.getcwd()
else:
args.append('O=build')
- args.append('-s')
+# args.append('-s')
if self.builder.num_jobs is not None:
args.extend(['-j', str(self.builder.num_jobs)])
config_args = ['%s_defconfig' % brd.target]
-bash-3.2$ git checkout tools/buildman/builder.py
-bash-3.2$ rm -rf ../working_upstream_qoriq/
-bash-3.2$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1
--keep-outputs --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
0 0 1 /1 MPC832XEMDS_HOST_66
-bash-3.2$ vi tools/buildman/builder.py
-bash-3.2$ rm -rf ../working_upstream_qoriq/-bash-3.2$ ./tools/buildman/buildman
-b working_upstream_qoriq --count=1 --keep-outputs --force-build
--force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
0 0 0 /1 (starting) ['make', 'mrproper', 'O=build', '-j', '24']
['make', 'O=build', '-j', '24', 'MPC832XEMDS_HOST_66_defconfig']
['make', 'O=build', '-j', '24']
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
1 0 0 /1 MPC832XEMDS_HOST_66
-bash-3.2$
I don't see ARCH defined anywhere.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
