Simon, Can you shed some light on my trouble? I am trying to use buildman for regression tests. I got inconsistency and am trying to find out why. Take one example MPC832XEMDS_HOST_66 in this case (I randomly pick a failed board)
On one computer $ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' winegcc: gcc-4.5 failed boards.cfg is up to date. Nothing to do. Building 15 commits for 1 boards (1 thread, 4 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support 02: qe: add u-qe support to arm board 03: qe: add qe support to ls1021aqds 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error 06: u_qe: add u_qe_upload_firmware for u_qe 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common 09: drivers: usb: fsl: Define USB configs for LS102XA 10: ls1: config: Enable USB EHCI Host on LS1021AQDS 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing 15 0 0 /15 MPC832XEMDS_HOST_66 No error. On another computer $ ./tools/buildman/buildman -b working_upstream_qoriq --force-build --force-reconfig MPC832XEMDS_HOST_66 -se No section: 'make-flags' boards.cfg is up to date. Nothing to do. Summary of 15 commits for 1 boards (1 thread, 24 jobs per thread) 01: ARM: atmel: add sama5d4 xplained ultra board support powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 02: qe: add u-qe support to arm board powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 03: qe: add qe support to ls1021aqds powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 04: qe: add qe support for ls1021a-twr board 05: arm: ls102xa: Fixed a register definition error powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 06: u_qe: add u_qe_upload_firmware for u_qe powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 07: powerpc: Move fsl_errata.h out of arch/powerpc 08: driver/usb/fsl: Make FSL USB driver common powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 09: drivers: usb: fsl: Define USB configs for LS102XA powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 10: ls1: config: Enable USB EHCI Host on LS1021AQDS powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 11: arm: ls102xa: Add snoop disable for slave port 0, 1 and 2 powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 12: arm: ls102xa: Remove bit reversing for SCFG registers 13: ls102xa: ifc: nor: fix the write issue when bytes unaligned powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 14: arm: ls102xa: Add SystemID EEPROM support for LS1021ATWR board powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 15: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing powerpc: MPC832XEMDS_HOST_66 -make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. -make: *** [sub-make] Error 2 You can see one error comes on and off. How can I debug it? I don't use python enough to diagnose the code. Is there a way to dump the make command to check? York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
