On 11/20/2014 11:22 AM, York Sun wrote:
> On 11/20/2014 11:13 AM, Simon Glass wrote:
>> You can only see the make output if you comment out this line in
>> builderthread.py:
>>
>> #args.append('-s')
>>
>> Then it will be in a file called 'log'. It would be nice to have an
>> option for that...
>>
>
> Let me try that.
>
I made the change to file tools/buildman/builderthread.py
- args.append('-s')
+# args.append('-s')
I run it again for one commit and with one board
$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs
--force-build --force-reconfig MPC832XEMDS_HOST_66 -ve
No section: 'make-flags'
boards.cfg is up to date. Nothing to do.
Building 1 commit for 1 boards (1 thread, 24 jobs per thread)
Cloning repo for thread 0
01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing
powerpc: + MPC832XEMDS_HOST_66
+make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by
`u-boot.lds'. Stop.
+make: *** [sub-make] Error 2
0 0 1 /1 MPC832XEMDS_HOST_66
$ ll
../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/
total 28
-rw-rw-r-- 1 jenkins jenkins 11588 Nov 20 13:28 autoconf.mk
-rw-rw-r-- 1 jenkins jenkins 1 Nov 20 13:28 done
-rw-rw-r-- 1 jenkins jenkins 168 Nov 20 13:28 err
-rw-rw-r-- 1 jenkins jenkins 939 Nov 20 13:28 log
-rw-rw-r-- 1 jenkins jenkins 276 Nov 20 13:28 toolchain
I don't see much useful information in file log
$ cat
../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/log
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
GEN ./Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
make[1]: Leaving directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
make[1]: Entering directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
CHK include/config/uboot.release
CHK include/generated/timestamp_autogenerated.h
GEN ./Makefile
UPD include/generated/timestamp_autogenerated.h
UPD include/config/uboot.release
make[1]: Leaving directory
`/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
Nothing more than that. Where shall I look for ARCH?
If I build for board T4240QDS, it has error on most but not all. T4240QDS
T4240QDS_SRIO_PCIE_BOOT T4240QDS_SECURE_BOOT failed, but T4240QDS_NAND didn't.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
