Hi Fabio,
On 11/12/2014 10:45 PM, Fabio Estevam wrote:
On Wed, Nov 12, 2014 at 6:42 PM, Nikolay Dimitrov <picmas...@mail.bg> wrote:
Hi John,
On 11/12/2014 07:14 PM, John Tobias wrote:
This patch is for SPL support for iMX6 SabreSD. The said
patches has been tested to work on SD2 and SD3 port of the
said board.
After applying the following patches, it will produces
SPL and u-boot.img binary images.
Is it still possible to build a regular, non-SPL image for the SabreSD?
Yes, it still works and I have tested it too.
make mx6qsabresd_config
make
will generate the non-SPL u-boot.imx binary.
Thanks. This is great, as the non-SPL version is much easier to upload
via OTG. At least I don't know a way to boot the SPL+complete loader
through OTG.
Regards,
Nikolay
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
